Simple Operating Procedures
This section lists the procedures that are most frequently asked, particularly those in
relation to the system settings.
Select the feature buttons in the sequence indicated by arrows.
Fax Settings
To change the name (company name) displayed on a recipient's machine
<Log In/Out>
[Fax Mode Settings]
For more information, refer to "Local Name" (P.321).
To change the name (company name) printed upon transmissions
<Log In/Out>
[Fax Mode Settings]
For more information, refer to "Company Logo" (P.321).
To have the name (company name) not printed upon transmissions
<Log In/Out>
[Fax Mode Settings]
For more information, refer to "Send Header" (P.314).
To change the dialing method (tone-dialing/pulse dialing)
<Log In/Out>
[Fax Mode Settings]
For more information, refer to "G3 Line 1, 2, 4 - Dial Type" (P.321).
To change the line type (external/internal)
<Log In/Out>
[Fax Mode Settings]
For more information, refer to "G3 Line 1, 2, 4 - Line Type" (P.321).
To register an address number
<Log In/Out>
[Address Book]
* When [Setup Menu] is displayed on the [All Services] screen: [Setup Menu]
For more information, refer to "Address Book (Address Number)" (P.347).
To print an address numbers list
<Machine Status>
[Fax Mode Settings]
For more information, refer to "Address Book" (P.397).
Enter the user ID
[System Settings]
[Local Terminal Information]
Enter the user ID
[System Settings]
[Local Terminal Information]
Enter the user ID
[System Settings]
[Fax Defaults]
Enter the user ID
[System Settings]
[Local Terminal Information]
Enter the user ID
[System Settings]
[Local Terminal Information]
Enter the user ID
[System Settings]
[Billing Meter/Print Report]
[Address Book]
Simple Operating Procedures
[System Settings]
[Local Name]
[System Settings]
[Company Logo]
[System Settings]
[Send Header]
[Off]
[System Settings]
[G3 Line Type]
[System Settings]
[G3 Line Type]
[Setup Menu]
[Address Book]
[Print Report/List]
17
585