Table of Contents
Advertisement
Job Assembly
On the [Job Assembly] screen, you can configure the build job features. The following
shows the reference section for each feature.
Build Job (Making Copies of Documents with Different Settings in a Single Operation)........ 91
Sample Set (Checking the Finished Output of the Copy) .......................................................... 93
Document > 50 sheets (Adding Originals)................................................................................. 94
Form Overlay (Making Copies to Overlay Documents)............................................................ 95
Delete Outside/Delete Inside (Deleting Outside or Inside of the Selected Area) ...................... 95
1
On the [All Services] screen, select
[Copy].
2
Select the [Job Assembly] tab and
then select a feature on the [Job
Assembly] screen that appears.
Build Job
(Making Copies of Documents with Different Settings in a Single Operation)
This feature allows you to change and save settings individually for each document
page or stack and then to finally make copies of documents with different settings as
one job.
Note
1
Select [Build Job].
2
Select [On].
3
When [On] is selected, you then
configure print settings.
Note
Off
Build Job is not applied.
On
Build Job is applied. The feature buttons appear. Set any item if necessary.
For the features that can be set here, refer to "Features that can be set in Build Job" (P.92).
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• Select [
] to return to the
previous screen or [
] to
move to the next screen.
Job Assembly
3
91
Advertisement
Table of Contents
