Other Settings - Fuji Xerox ApeosPort 450 I User Manual

11 System Settings

Other Settings

You can make other settings relating to the machine itself.
1
Select [Other Settings].
2
Select the item to be set or
changed, and select [Change
Settings].
Note
3
Select the setting value.
4
Select [Save].
11
Offset Stacking (Center Output Tray)
When you select offset stacking, each of output documents is delivered at a slightly
shifted position from the position of the previous document. If the previous document
is delivered at the front side of the machine, the next document is delivered at the rear
side of the machine. Set the operation of this offset feature.
Note
Off
No offset output.
Offset per set
Output paper in the number of copy sets being made.
Offset per job
Output paper with each job offset.
Offset Stacking (Center Tray - Upper)
Set the offset feature for the center tray - upper.
For information on the settings, refer to "Offset Stacking (Center Output Tray)" (P.280).
Note
Offset Stacking (Center Tray - Lower)
Set the offset feature for the center tray - lower.
For information on the settings, refer to "Offset Stacking (Center Output Tray)" (P.280).
Note
280
• Select [ ] to return to the
previous screen or [ ] to move to the next screen.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• This item varies depending on the options installed in the machine.
- When a finisher or Exit 2 Tray is not installed: Center Output Tray
- When an Exit 2 Tray is installed without installing a finisher: [Offset Stacking (Center Tray -
Upper)] and [Offset Stacking (Center Tray - Lower)]
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• This item appears when an Exit 2 Tray (optional) is installed.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• This item appears when an Exit 2 Tray (optional) is installed.