Table of Contents
Advertisement
Overwrite Hard Disk
You can check the overwriting status of the hard disk. The "Standby" status indicates
the completion of the overwriting process.
Note
1
Select [Overwrite Hard Disk].
Print Mode
You can set print modes.
Note
1
Select [Print Mode].
2
Select [Off-line] or [On-line].
Off-line
The printer cannot accept data. Any data being sent is canceled and not printed.
On-line
The printer can accept data.
3
Select a printer language.
4
Select the item to be set.
Retrieve Programming
You can retrieve and use print modes registered in the memory.
1
Select [Retrieve Programming].
2
Select the memory number to be
used.
Factory Defaults
You can use the factory default settings.
Custom Settings
The numbers stored in the memory appear.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• [Overwrite Hard Disk] appears only when [Overwrite Hard Disk] is enabled in [System
Settings]. For more information, refer to "Overwrite Hard Disk" (P.285).
• The items displayed vary depending on the options installed.
Machine Status
13
387
Advertisement
Table of Contents
