Hole Punching; Output Destination; Staple Position - Fuji Xerox ApeosPort 450 I User Manual

3 Copy
Collated/Stapling/Punching
The machine outputs sheets sorted into sets that are arranged in page order.
Uncollated
The machine outputs the specified number of copies and sort sheets by page.
Stapling
Displays the [Copy Output / Stapling] screen.
Refer to "[Copy Output / Stapling] Screen" (P.74).

Hole Punching

Displays the [Finishing - Hole Punching] screen.
Refer to "[Finishing - Hole Punching] Screen" (P.75).

Output Destination

Select the paper tray.
Note
3
[Copy Output / Stapling] Screen
Sets the position for stapling. The number of pages that can be stapled is 2 to 50 (paper
not greater than 90g/m
paper, side 2 paper, lightweight 1 paper (56 - 63 g/m
g/m
Important • Confirm that the orientation of the document and the [Original Orientation] setting of the
Note
1
Sets the position for stapling.
None
Stapling is not performed.

Staple Position

Select from 5 staple positions: 1 Staple, Top Left; 2 Staples, Left; 2 Staples, Top; 1
Staple, Top Right; and 2 Staples, Right.
Important • The staple direction appearing on the screen and the direction in which staples are actually
74
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• When the finisher is installed, [Output Tray] means the upper tray of the finisher.
• When the Exit 2 Tray is installed, [Center Tray - Upper] and [Center Tray - Lower] are
displayed.
2
). Paper types that can be stapled are plain paper, recycled
2
), heavyweight 2 paper (170 - 216 g/m
[Scan Options] screen are the same.
• When stapling paper of greater than 90 g/m 2 or of less than 64 g/m 2 , even if the number of
sheets is 50 or less, it may not be stapled properly.
stapled may differ depending on the combination of the document size and orientation. For
example, the actual staple direction is vertical although the staple direction appearing on the
screen is slanting.
2
), heavyweight 1 paper (106 - 169
2
), and User1 to User5 paper.