Pki (Public Key) Settings - Fuji Xerox ApeosPort 450 I User Manual

11 System Settings
Server - Server Name
Set the server name of the remote authentication server. Up to 255 characters are
allowed.
Note
Server - Port Number
Set the remote authentication server port number in the range 1 to 65535.
Server - Realm Name
When using an active directory of Windows 2000 Server or Windows Server 2003, set
the domain name of the active directory as a realm name. 64 characters are allowed.
Important • Enter a realm name with a capital letters. Otherwise, an authentication error occurs.
11

PKI (Public Key) Settings

You can set the HTTP-SSL/TLS and S/MIME.
Note
1
Select [PKI (Public Key) Settings].
2
Select the item to be set.
HTTP - SSL/TLS Settings
Set the HTTP-SSL/TLS.
1
Select the item to be set or
changed, and select [Change
Settings].
2
Set the setting value.
3
Select [Save].
Device Certificate - SSL Server
Select a certificate to be linked.
HTTP - SSL/TLS Communication
Enable or disable the HTTP-SSL/TLS communications.
HTTP - SSL/TLS Port Number
Set the HTTP-SSL/TLS communications port number in the range from 1 to 65535.
S/MIME Settings
Set the S/MIME.
1
Select the item to be set or
changed, and select [Change
Settings].
2
Select the setting value.
3
Select [Save].
298
• You can set the server name when [Server - Server Setup] is set to [By Server Name].
• Before setting the HTTP-SSL/TLS or S/MIME communications, the device certificate must
be set. For information on the device certificate, refer to the Network Administrator Guide.