Lexmark CX825 Service Manual page 312

Action
Step 32
Reinstall or replace the gear. See
on page 1003.
Does the problem remain?
Step 33
Check the door N guide for misalignment and damage.
•
Check the door guide for wear, damage, and contamination.
•
Check the door guide for missing rollers.
•
Check the door guide hinges for proper installation.
•
Check if door N can properly close.
Is the door guide properly installed and free of damage?
Step 34
Reinstall or replace the door guide. See
removal" on page 1094.
Does the problem remain?
Step 35
Check the roller J2 for contamination, wear, and damage.
Is the roller free of damage?
Step 36
Check the roller J2 for misalignment.
Is the roller properly installed?
Step 37
Reinstall or replace the roller.
Does the problem remain?
Step 38
Check the mid‑transport interface board cables.
•
Reseat all connectors on the interface board.
•
Make sure that the cables are properly routed.
Does the problem remain?
Step 39
Replace the interface board. See
removal" on page 1005.
Does the problem remain?
"Mid-transport gear removal"
"Staging paper guide
"Mid-transport interface board
Diagnostic information
312
Yes No
Go to step 33. The problem is
solved.
Go to stèp 35. Go to step 34.
Go to step 35. The problem is
solved.
Go to step 36. Go to step 37.
Go to step 38. Go to step 37.
Go to step 38. The problem is
solved.
Go to step 39. The problem is
solved.
Go to step 40. The problem is
solved.
7564