7
Remove the two screws (C), and then remove the staple unit.
Staple finisher jam door switches removal
1
Remove the right cover. See
2
Remove the rear cover. See
3
Remove the controller board. See
4
Remove the inner rear cover. See
5
Remove the ejector. See
6
Remove the spring (A).
7
Release the two latches (B), and then remove the switches.
Note: Pay attention to the switch assignments based on the cable colors.
C
"Staple finisher right cover removal" on page
"Staple finisher rear cover removal" on page
"Staple finisher controller board removal" on page
"Staple finisher inner rear cover removal" on page
"Staple finisher staple unit ejector removal" on page
Repair information
807
787.
788.
790.
795.
803.
7564