Duplex Drive Gears Removal - Lexmark CX825 Service Manual

Duplex drive gears removal

1
Open door B, and then remove the two E-clips (A).
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching it.
2
Remove the gears.
Installation warning: Make sure that the torsion spring is properly installed.
Duplex release latch removal
1
Open door B.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching it.
2
Release the inner duplex guide, and then swing it toward the printer.
A
Repair information
608
7564