Staple finisher upper exit roller removal
1
Remove the front cover. See
2
Remove the paddle motor and bracket. See
812.
3
Remove the paddle. See
4
Remove the rear cover. See
5
Remove the controller board. See
6
Remove the inner rear cover. See
7
Remove the motor (staple finisher upper exit roller). See
on page
799.
8
Set aside the spring (A), and then remove the clip (B) and bushing.
"Staple finisher front cover removal" on page
"Motor (staple finisher aligner paddle) removal " on page
"Staple finisher aligner paddle and upper paper guide removal" on page
"Staple finisher rear cover removal" on page
"Staple finisher controller board removal" on page
"Staple finisher inner rear cover removal" on page
B
A
Repair information
"Motor (staple finisher upper exit roller) removal"
841
787.
788.
790.
795.
7564
838.