Page 1 CX825 and CX860 Series User's Guide March 2016 www.lexmark.com Machine type(s): 7564 Model(s): 336, 337, 536, 537...
Page 2: Table Of Contents
Contents Contents Safety information..................6 Conventions................................6 Learning about the printer................9 Finding information about the printer......................9 Selecting a location for the printer........................ 10 Printer conﬁgurations............................11 Attaching cables..............................13 Using the control panel............................ 15 Understanding the status of the power button and indicator light............16 Using the home screen.............................16 Menus list................................17 Printing a menu settings page........................
Page 3 Contents Printing a font sample list..........................28 Printing a directory list............................. 28 Canceling a print job............................28 Copying......................29 Making copies..............................29 Copying photos..............................29 Copying on letterhead............................. 29 Copying on both sides of the paper (two‑sided)..................29 Reducing or enlarging copies........................30 Collating copies..............................
Page 4 Contents Sending scanned documents to a computer.................... 50 Securing the printer..................51 Locating the security slot..........................51 Erasing printer memory............................ 51 Erasing printer hard disk memory........................51 Conﬁguring printer hard disk encryption....................52 Restoring factory default settings......................... 52 Statement of Volatility............................52 Maintaining the printer................
Page 5 Contents Troubleshooting..................129 Network connection problems........................129 Hardware options problems.......................... 131 Paper feed problems............................133 Printing problems.............................136 Color quality problems........................... 155 Faxing problems.............................. 158 Scanning problems............................161 Contacting customer support........................164 Upgrading and migrating.................165 Hardware................................165 Software................................187 Firmware................................188 Notices......................189 Index......................193...
Page 6: Safety Information
CAUTION—POTENTIAL INJURY: Only a Lexmark Inline Surge Protector that is properly connected between the printer and the power cord provided with the printer may be used with this product. The use of non-Lexmark surge protection devices may result in a risk of ﬁre, property damage, or poor printer performance.
Page 7 CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a caster base, furniture, or other feature to prevent instability causing possible injury. For more information on supported conﬁgurations, see www.lexmark.com/multifunctionprinters. CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Page 8 Safety information CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, use caution in areas marked with this label. Pinch injuries may occur around moving parts, such as gears, doors, trays, and covers. CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those speciﬁed in the User’s Guide may result in hazardous radiation exposure.
Page 9: Learning About The Printer
Caring for and maintaining the printer • Troubleshooting and solving problems Information on setting up and conﬁguring the accessibility Lexmark Accessibility Guide—The guide is features of your printer available at http://support.lexmark.com. Help using the printer software Help for Microsoft® Windows® or Macintosh operating systems—Open a printer software...
Page 10: Selecting A Location For The Printer
For more information, see the documentation that came with the printer or go to http://support.lexmark.com. Selecting a location for the printer When selecting a location for the printer, leave enough room to open trays, covers, and doors and to install hardware options.
Page 11: Printer Configurations
Learning about the printer • Observe the recommended temperatures and avoid ﬂuctuations: Ambient temperature 10 to 32.2°C (50 to 90°F) Storage temperature -40 to 43.3°C (-40 to 110°F) • Allow the following recommended amount of space around the printer for proper ventilation: 330 mm (13 in.) Right side 152 mm (6 in.) Front...
Page 12 CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a caster base, furniture, or other feature to prevent instability causing possible injury. For more information on supported conﬁgurations, see www.lexmark.com/multifunctionprinters. You can conﬁgure your printer by adding three optional 550‑sheet trays or an optional 2200‑sheet tray.
Page 13: Attaching Cables
Learning about the printer Staple ﬁnisher Note: This option is not supported if another ﬁnisher is installed. Multiposition staple, hole punch ﬁnisher Note: This option is not supported if another ﬁnisher is installed. Mailbox Optional 2200‑sheet tray Caster base Optional 550‑sheet tray Attaching cables CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily...
Page 14 Learning about the printer Warning—Potential Damage: Do not touch the USB cable, any wireless network adapter, or the printer in the area shown while actively printing. Loss of data or a malfunction can occur. Use the EXT port Connect additional devices (telephone or answering machine) to the printer and the telephone line.
Page 15: Using The Control Panel
Learning about the printer Using the control panel Use the Display • View the printer messages and supply status. • Set up and operate the printer. Home button Go to the home screen. Power button • Turn on or turn off the printer. Note: To turn off the printer, press and hold the power button for ﬁve seconds.
Page 16: Understanding The Status Of The Power Button And Indicator Light
Learning about the printer Understanding the status of the power button and indicator light Indicator light Printer status The printer is off or in Hibernate mode. Blue The printer is ready or processing data. The printer requires user intervention. Power button light Printer status The printer is off, ready, or processing data.
Page 17: Menus List
Bin Conﬁguration Fax Server Setup Alert Types Quality Anti‑Spam Logic Description Job Accounting Suppressing Duplicate Alerts Image Power Management Information Sent to Lexmark Accessibility HTML Restore Factory Defaults PostScript Maintenance Remote Operator Panel PPDS Visible Home Screen Icons Site Map...
Page 18: Printing A Menu Settings Page
Learning about the printer E‑mail Network/Ports USB Drive Security E‑mail Defaults FTP Defaults Network Overview Flash Drive Login Methods Scan E‑mail Setup Wireless Certiﬁcate Management Flash Drive Web Link Setup AirPrint Schedule USB Devices Print Ethernet Security Audit Log TCP/IP Login Restrictions IPv6 Conﬁdential Print Setup...
Page 19: Setting Up And Using The Home Screen Applications
Setting up and using the home screen applications Setting up and using the home screen applications Customizing the home screen Open a Web browser, and then type the printer IP address in the address ﬁeld. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Page 20: Using Shortcut Center
Setting up and using the home screen applications Conﬁgure the output options and scan settings. Notes: • When scanning a card, make sure that the scan resolution does not exceed 200 dpi for color and 400 dpi for black and white. •...
Page 21: Loading Paper And Specialty Media
Loading paper and specialty media Loading paper and specialty media Setting the size and type of the specialty media The trays automatically detect the size of plain paper. For specialty media like labels, card stock, or envelopes, do the following: From the home screen, navigate to: Settings >...
Page 22 Loading paper and specialty media Flex, fan, and align the paper edges before loading. Load the paper with the printable side faceup. Notes: • Load letterhead faceup with the header on the left side of the tray for one‑sided printing. •...
Page 23: Loading The Multipurpose Feeder
Loading paper and specialty media Loading the multipurpose feeder Open the multipurpose feeder. Adjust the guide to match the size of the paper you are loading. Flex, fan, and align the paper edges before loading. Load the paper. • Load paper, card stock, and transparencies with the printable side facedown and the top edge entering the printer ﬁrst.
Page 24: Linking Trays
Loading paper and specialty media • Load envelopes with the ﬂap side up and against the left side of the paper guide. Load European envelopes with the ﬂap side up and entering the printer ﬁrst. Warning—Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives.
Page 25: Printing
Printing Printing CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, use caution in areas marked with this label. Pinch injuries may occur around moving parts, such as gears, doors, trays, and covers. Printing from a computer Note: For specialty media such as labels, card stock, and envelopes, set the paper size and type in the printer before sending the print job.
Page 26: Supported Flash Drives And File Types
Printing From the display, touch the document that you want to print. If necessary, conﬁgure other print settings. Send the print job. To print another document, touch USB Drive. Warning—Potential Damage: Do not touch the printer or the ﬂash drive in the area shown while actively printing, reading, or writing from the memory device.
Page 27: Configuring Confidential Jobs
Printing Images: • .dcx • .gif • .jpeg or .jpg • .bmp • .pcx • .tiff or .tif • .png Conﬁguring conﬁdential jobs From the home screen, touch Settings > Security > Conﬁdential Print Setup. Conﬁgure the settings. Max Invalid PIN Limit the number of times an invalid PIN can be entered.
Page 28: Printing A Font Sample List
Printing Printing a font sample list From the home screen, touch Settings > Reports > Print > Print Fonts. Touch PCL Fonts or PostScript Fonts. Printing a directory list From the home screen, touch Settings > Reports > Print > Print Directory. Canceling a print job From the printer control panel From the home screen, touch Job Queue.
Page 29: Copying
Copying Copying Making copies Load an original document into the ADF tray or on the scanner glass. Notes: • To avoid a cropped image, make sure that the size of the original document and output is the same. • To make a quick copy, from the control panel, press From the home screen, touch Copy, and then specify the size of the original document.
Page 30: Reducing Or Enlarging Copies
Copying Reducing or enlarging copies Load an original document into the ADF tray or on the scanner glass. From the home screen, navigate to: Copy > Scale > specify a scale value Notes: • Changing the size of the original document or output after setting Scale restores the scale value to Auto.
Page 31: E-Mailing
E-mailing E-mailing Setting up the e‑mail function From the home screen, touch Settings > Device > Preferences > Run Initial Setup. Turn off the printer, wait for about 10 seconds, and then turn it back on. From the Before You Begin screen, select Change the Settings and Continue with the Wizard. From the Fax/Email Server Setup screen, enter the needed information.
Page 32: Creating An E-Mail Shortcut
E-mailing Creating an e-mail shortcut From the home screen, touch E‑mail. Conﬁgure the settings, and then touch Enter a shortcut name. Apply the changes.
Page 33: Faxing
Faxing Faxing Setting up the printer to fax Notes: • The following connection methods are applicable only in some countries or regions. • During the initial printer setup, clear the fax function check box and any other function you plan to set up later, and then touch Continue.
Page 34 Faxing Setting up fax using a standard telephone line CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a lightning storm.
Page 35 Faxing Setup 2: Printer is sharing the line with an answering machine Note: If you subscribe to a distinctive ring service provided by your telephone company, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer does not receive faxes even if you have set it to receive faxes automatically.
Page 36 Faxing Connected to different wall jacks Connect one end of the telephone cable to the line port of the printer. Connect the other end of the telephone cable to an active analog wall jack. Notes: • If you have only one telephone number on your line, then set the printer to receive faxes automatically. •...
Page 37 Faxing Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service Connect one end of the telephone cable to the line port of the printer. Connect the other end of the telephone cable to an active analog wall jack. Connect the telephone to the telephone port of the printer.
Page 38 Faxing Setting up fax using digital subscriber line CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a lightning storm.
Page 39 Faxing Connect the line port of the DSL ﬁlter to the wall jack. Connect one end of the telephone cable to the line port of the printer. Connect the other end to the phone port on the DSL ﬁlter. To connect a telephone to the printer, remove any installed adapter plug from the telephone port of the printer, and then connect the telephone.
Page 40 Faxing Connect one end of the telephone cable to the line port of the printer. Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter. Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge extra cost for the activation of the second phone port.
Page 41 Faxing Setup 1: Printer is connected directly to a cable modem Connect one end of the telephone cable to the line port of the printer. Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem. Connect your analog telephone to the telephone port of the printer.
Page 42 Faxing Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the facility Connect one end of the telephone cable to the line port of the printer. Connect the other end of the telephone cable to an active analog telephone wall jack. Connect your analog telephone to the telephone port of the printer.
Page 43 There may be an adapter plug installed in the telephone port of the printer. Do not remove the adapter plug from the telephone port of the printer if you are connecting to a serial or cascaded telephone system. Part name Part number Lexmark adapter plug 40X8519...
Page 44 Faxing Connecting the printer to a non‑RJ11 wall jack Connect one end of the telephone cable to the line port of the printer. Connect the other end of the cable to the RJ11 adapter, and then connect the adapter to the wall jack. If you want to connect another device with a non‑RJ11 connector to the same wall jack, then connect it directly to the telephone adapter.
Page 45 Faxing Connecting the printer to a wall jack in Germany The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones. Connect the printer to any of the N ports. Connect one end of the telephone cable to the line port of the printer.
Page 46: Sending A Fax
Faxing Connecting to a distinctive ring service A distinctive ring service lets you have multiple telephone numbers on one telephone line. Each telephone number is assigned a different ring pattern. From the home screen, touch Settings > Fax > Analog Fax Setup > Fax Receive Settings > Admin Controls >...
Page 47: Scheduling A Fax
Faxing For Macintosh users With a document open, choose File > Print. Select the printer and enter the recipient number. If necessary, conﬁgure other fax settings. Send the fax job. Scheduling a fax Load the original document into the ADF tray or on the scanner glass. From the home screen, navigate to: Fax >...
Page 48: Viewing A Fax Log
Faxing Adjust the Darkness setting. Send the fax job. Viewing a fax log Open a Web browser, and then type the printer IP address in the address ﬁeld. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Page 49: Scanning
Scanning Scanning Scanning to an FTP server Load the original document into the ADF tray or on the scanner glass. From the home screen, touch FTP, and then enter the needed information. If necessary, conﬁgure other FTP settings. Send the FTP job. Creating an FTP shortcut From the home screen, touch FTP.
Page 50: Sending Scanned Documents To A Computer
Scanning Sending scanned documents to a computer Load an original document into the ADF tray or on the scanner glass. From the home screen, touch Scan Proﬁles > Scan To Computer. Select the scan proﬁle where you want to save the document.
Page 51: Securing The Printer
Securing the printer Securing the printer Locating the security slot The printer is equipped with a security lock feature. Attach a security lock compatible with most laptop computers in the location shown to secure the printer in place. Erasing printer memory To erase volatile memory or buffered data in your printer, turn off the printer.
Page 52: Configuring Printer Hard Disk Encryption
Securing the printer Conﬁguring printer hard disk encryption From the home screen, touch Settings > Security > Disk Encryption > Start Encryption. Note: Enabling disk encryption erases the contents of the hard disk. If necessary, back up important data from the printer before starting the encryption. Follow the instructions on the display.
Page 53 Securing the printer Disposing of a printer hard disk Note: Some printer models may not have a printer hard disk installed. In high‑security environments, it may be necessary to take additional steps to make sure that conﬁdential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.
Page 54: Maintaining The Printer
Maintaining the printer Maintaining the printer Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and supplies, may cause damage to your printer. Networking Note: Purchase a MarkNet(TM) N8360 wireless network adapter ﬁrst before setting up the printer on a wireless network.
Page 55: Setting Up Serial Printing (Windows Only)
Maintaining the printer Changing port settings after installing an internal solutions port Notes: • If the printer has a static IP address, then do not change the conﬁguration. • If the computers are conﬁgured to use the network name instead of an IP address, then do not change the conﬁguration.
Page 56: Cleaning Printer Parts
Maintaining the printer Cleaning printer parts Cleaning the printer CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding.
Page 57 Maintaining the printer Wipe the areas shown with a damp, soft, lint-free cloth. White underside of the scanner cover Scanner glass Automatic document feeder (ADF) glass White underside of the ADF cover Close the scanner cover. Emptying the hole punch box Open door J.
Page 58 Maintaining the printer Remove and empty the hole punch box. Insert the hole punch box. Close door J.
Page 59: Ordering Parts And Supplies
Using genuine Lexmark parts and supplies Your Lexmark printer is designed to function best with genuine Lexmark parts and supplies. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. It can also affect warranty coverage.
Page 60 Maintaining the printer Item United States European Rest of Latin America Rest of Asia Australia and and Canada Economic Europe, Distribution Paciﬁc (AP) New Zealand Area (EEA+) Middle East, (LAD) (ANZ) and Africa (EMEA) Magenta 82K1HM0 82K2HM0 82K5HM0 82K4HM0 82K3HM0 82K6HM0 Yellow 82K1HY0...
Page 61 Maintaining the printer Ordering developer units Item Part number Return Program developer units Black developer unit 72K0DK0 Color (CMY) developer kit 72K0DV0 Cyan developer unit 72K0DC0 Magenta developer unit 72K0DM0 Yellow developer unit 72K0DY0 Regular developer units Black developer unit 72K0D10 Color (CMY) developer kit 72K0D50...
Page 62: Replacing Parts And Supplies
Maintaining the printer Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. Click Settings >...
Page 63 Maintaining the printer Open door A. Remove the waste toner bottle.
Page 64 Maintaining the printer Remove the imaging unit. Remove the developer unit. Unpack the new developer unit, and then remove the packing material. Insert the new developer unit.
Page 65 Maintaining the printer Insert the imaging unit. Insert the waste toner bottle. Close doors A and B. Replacing the fuser Turn off the printer. Open door B. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
Page 66 Maintaining the printer Remove the fuser. Unpack the new fuser. Clean the fuser lens using the cotton swab that came with the package.
Page 67 Maintaining the printer Insert the new fuser until it clicks into place. Close door B. Turn on the printer. Replacing a photoconductor unit Open door B. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
Page 68 Maintaining the printer Open door A. Remove the waste toner bottle.
Page 69 Maintaining the printer Remove the imaging unit. Remove the photoconductor unit. Unpack the new photoconductor unit, and then remove the packing material. Warning—Potential Damage: Do not expose the photoconductor unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning—Potential Damage: Do not touch the photoconductor drum.
Page 70 Maintaining the printer Insert the imaging unit. Insert the waste toner bottle. Close doors A and B. Replacing an imaging unit Open door B. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
Page 71 Maintaining the printer Open door A. Remove the waste toner bottle.
Page 72 Maintaining the printer Remove the imaging unit. Unpack the new imaging unit, and then remove the packing material. Warning—Potential Damage: Do not expose the photoconductor unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning—Potential Damage: Do not touch the photoconductor drum.
Page 73 Maintaining the printer Insert the waste toner bottle. Close doors A and B. Replacing a toner cartridge Open door A. Remove the toner cartridge. Unpack the new toner cartridge.
Page 74 Maintaining the printer Insert the new toner cartridge until it clicks into place. Close door A. Replacing the pick roller Replacing the pick roller in the 550‑sheet tray Turn off the printer. Remove the tray.
Page 75 Maintaining the printer Remove the pick roller. Unpack the new pick roller.
Page 76 Maintaining the printer Insert the new pick roller until it clicks into place. Insert the tray. Turn on the printer.
Page 77 Maintaining the printer Replacing the pick roller in the 2200‑sheet tray Turn off the printer. Pull out, and then unlock the tray. Remove the tray. Remove the pick roller. Unpack the new pick roller.
Page 78 Maintaining the printer Insert the new pick roller until it clicks into place. Insert the tray. Turn on the printer.
Page 79 Maintaining the printer Replacing the separator bracket Pull out the tray. Remove the separator bracket. Unpack the new separator bracket. Insert the new separator bracket until it clicks into place. Insert the tray.
Page 80 Maintaining the printer Replacing the waste toner bottle Open door A. Remove the waste toner bottle. Unpack the new waste toner bottle. Insert the new waste toner bottle. Close door A.
Page 81 Maintaining the printer Replacing the transfer belt Turn off the printer. Open door B. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. Open door A.
Page 82 Maintaining the printer Remove the waste toner bottle. Open door A1. Remove the transfer belt.
Page 83 Maintaining the printer Unpack the new transfer belt, and then remove the packing material. Warning—Potential Damage: Do not expose the transfer belt to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning—Potential Damage: Do not touch the transfer belt. Doing so may affect the print quality of future print jobs.
Page 84 Maintaining the printer Insert the waste toner bottle. Close doors A and B. Turn on the printer. Replacing the transfer roller Open door B. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
Page 85 Maintaining the printer Unpack the new transfer roller. Note: Do not remove the white packing material. Insert the new transfer roller. Remove the white packing material. Close door B.
Page 86 Maintaining the printer Replacing the ADF pick roller Turn off the printer. Open door D. Remove the ADF pick roller cover. Remove the ADF pick roller. Warning—Potential Damage: Some parts of the printer are easily damaged by static electricity. Before touching any parts or components in an area marked with the static‑sensitive symbol, touch a metal surface in an area away from the symbol.
Page 87 Maintaining the printer Unpack the new ADF pick roller. Insert the new ADF pick roller until it clicks into place. Warning—Potential Damage: Some parts of the printer are easily damaged by static electricity. Before touching any parts or components in an area marked with the static‑sensitive symbol, touch a metal surface in an area away from the symbol.
Page 88 Maintaining the printer Replacing the ADF feed roller Turn off the printer. Open door D. Remove the ADF pick roller cover. Remove the ADF feed roller. Warning—Potential Damage: Some parts of the printer are easily damaged by static electricity. Before touching any parts or components in an area marked with the static‑sensitive symbol, touch a metal surface in an area away from the symbol.
Page 89 Maintaining the printer Unpack the new ADF feed roller. Insert the new ADF feed roller until it clicks into place. Insert the ADF pick roller cover until it clicks into place. Close door D. Turn on the printer.
Page 90 Maintaining the printer Replacing the ADF separator roller Turn off the printer. Open door D. Remove the ADF separator roller cover. Remove the ADF separator roller. Warning—Potential Damage: Some parts of the printer are easily damaged by static electricity. Before touching any parts or components in an area marked with the static‑sensitive symbol, touch a metal surface in an area away from the symbol.
Page 91 Maintaining the printer Unpack the new ADF separator roller. Insert the new ADF separator roller until it clicks into place. Insert the ADF separator roller cover until it clicks into place. Close door D. Turn on the printer. Replacing the staple cartridge unit Replacing the staple cartridge in the staple ﬁnisher Open door C.
Page 92 Maintaining the printer Open door G. Remove the staple cartridge. Unpack the new staple cartridge.
Page 93 Maintaining the printer Insert the new staple cartridge until it clicks into place. Close doors G and C. CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, keep hands clear of the labeled area when closing door C. Replacing the staple cartridge holder in the staple ﬁnisher Open door C.
Page 94 Maintaining the printer Open door G. Pull out the staple cartridge holder.
Page 95 Maintaining the printer Remove the staple cartridge. Unpack the new staple cartridge holder. Insert the staple cartridge until it clicks into place.
Page 96 Maintaining the printer Insert the staple cartridge holder until it clicks into place. Close doors G and C. CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, keep hands clear of the labeled area when closing door C. Replacing the staple cartridge in the multiposition staple, hole punch ﬁnisher Open door J.
Page 97 Maintaining the printer Unpack the new staple cartridge. Insert the new staple cartridge until it clicks into place. Close door J.
Page 98 Maintaining the printer Replacing the staple cartridge holder in the multiposition staple, hole punch ﬁnisher Open door J. Remove the staple cartridge holder. Remove the staple cartridge. Unpack the new staple cartridge holder.
Page 99: Moving The Printer
Maintaining the printer Insert the staple cartridge until it clicks into place. Insert the staple cartridge holder until it clicks into place. Close door J. Moving the printer Moving the printer to another location CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.
Page 100: Saving Energy And Paper
Make sure that there is adequate clearance around the printer. Note: Damage to the printer caused by improper moving is not covered by the printer warranty. Shipping the printer For shipping instructions, go to http://support.lexmark.com or contact customer support. Saving energy and paper Setting up power saver modes Eco‑Mode...
Page 101: Recycling
The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area. When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark recycles the box.
Page 102 The boxes used to return the cartridges are also recycled. To return Lexmark cartridges for reuse or recycling, follow the instructions that came with the cartridge and use the prepaid shipping label. You can also do the following: Go to www.lexmark.com/recycle.
Page 103: Clearing Jams
Clearing jams Clearing jams Avoiding jams Load paper properly • Make sure that the paper lies ﬂat in the tray. Correct loading of paper Incorrect loading of paper • Do not load or remove a tray while the printer is printing. •...
Page 104: Identifying Jam Locations
Clearing jams • Flex, fan, and align the paper edges before loading. • Do not use paper that has been cut or trimmed by hand. • Do not mix paper sizes, weights, or types in the same tray. • Make sure that the paper size and type are set correctly on the computer or printer control panel. •...
Page 105 Clearing jams Jam locations Automatic document feeder (ADF) Standard bin Door G Door F Trays Conﬁgured model Jam locations Door L Door J Door K Door N...
Page 106: Paper Jam In Trays
Clearing jams Paper jam in trays Pull out the tray. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Insert the tray. Open the tray cover.
Page 107: Paper Jam In The Multipurpose Feeder
Clearing jams Remove the jammed paper. Note: Make sure that all paper fragments are removed. Close the tray cover. Paper jam in the multipurpose feeder Remove paper from the multipurpose feeder. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Open door B, and then remove any paper fragments.
Page 108: Paper Jam In The Automatic Document Feeder
Clearing jams Close door B. Flex, fan, and align the paper edges before loading. Reload paper. Paper jam in the automatic document feeder Remove all original documents from the ADF tray. Open door D. Remove the jammed paper. Note: Make sure that all paper fragments are removed.
Page 109 Clearing jams Warning—Potential Damage: Some parts of the printer are easily damaged by static electricity. Before touching any parts or components in an area marked with the static‑sensitive symbol, touch a metal surface in an area away from the symbol. Close door D.
Page 110: Paper Jam In The Standard Bin
Clearing jams Open door E. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Close door E and the scanner cover. Paper jam in the standard bin Remove the jammed paper. Note: Make sure that all paper fragments are removed.
Page 111: Paper Jam In Door B
Clearing jams Open door B, and then remove any paper fragments. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. Close door B. Paper jam in door B Paper jam in the fuser Open door B.
Page 112 Clearing jams Remove the jammed paper. Note: Make sure that all paper fragments are removed.
Page 113 Clearing jams Open the fuser access door. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Close door B. Paper jam in the duplex unit Open door B. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
Page 114 Clearing jams Remove the jammed paper. Note: Make sure that all paper fragments are removed. Open the duplex cover. Remove the jammed paper. Note: Make sure that all paper fragments are removed.
Page 115: Paper Jam In The Finisher Bin
Clearing jams Close the duplex cover and door B. Paper jam in the ﬁnisher bin Remove the jammed paper. Note: Make sure that all paper fragments are removed.
Page 116 Clearing jams Open door C. Open door F. Remove the jammed paper. Note: Make sure that all paper fragments are removed.
Page 117: Staple Jam In Door G
Clearing jams Close doors F and C. CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, keep hands clear of the labeled area when closing door C. Staple jam in door G Open door C.
Page 118 Clearing jams Open door G. Pull out the staple cartridge holder.
Page 119 Clearing jams Lift the staple guard, and then remove the loose staples. Note: Do not insert the staples that came out of the cartridge. Close the staple guard.
Page 120: Paper Jam In Door K
Clearing jams Insert the staple cartridge holder. Close doors G and C. CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, keep hands clear of the labeled area when closing door C. Paper jam in door K Open doors C and K. Remove the jammed paper.
Page 121: Paper Jam In Door J
Clearing jams • Using knob J2 Close doors K and C. CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, keep hands clear of the labeled area when closing door C. Paper jam in door J Open door J. Remove the jammed paper.
Page 122 Clearing jams • Area J1 • Areas J3 and J4 • Areas J5 and J6 Close door J.
Page 123: Paper Jam In Door N
Clearing jams Paper jam in door N Open door N. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Close door N.
Page 124: Paper Jam In Door L
Clearing jams Paper jam in door L Open door L. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Close door L.
Page 125: Paper Jam In The Staple Finisher Bin
Clearing jams Paper jam in the staple ﬁnisher bin Open door J. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Close door J.
Page 126: Staple Jam In Door J
Clearing jams Staple jam in door J Open door J. Remove the staple cartridge holder.
Page 127 Clearing jams Open the staple guard, and then remove the loose staples. Note: Do not insert the staples that came out of the cartridge. Close the staple guard.
Page 128 Clearing jams Insert the staple cartridge holder. Close door J.
Page 129: Troubleshooting
Troubleshooting Troubleshooting Network connection problems Embedded Web Server does not open Action Step 1 Go to step 2. Install a supported browser. Check if you are using a supported browser: • Windows Internet Explorer version 9 or later • Macintosh Safari version 8.0.3 or later •...
Page 130 Troubleshooting Action Step 6 Go to step 7. Contact your administrator. Temporarily disable the Web proxy servers. Note: Proxy servers may block or restrict you from accessing certain Web sites including the Embedded Web Server. Are the Web proxy servers disabled? Step 7 The problem is Contact...
Page 131: Hardware Options Problems
Troubleshooting Hardware options problems Cannot detect internal option Action Step 1 The problem is Go to step 2. solved. Turn off the printer, wait for about 10 seconds, and then turn it back Does the internal option operate correctly? Step 2 Go to step 4.
Page 132 Troubleshooting Internal solutions port does not operate correctly Action Step 1 Go to step 3. Go to step 2. Print a menu settings page, and then check if the internal solutions port (ISP) appears in the Installed Features list. Is the ISP listed in the Installed Features list? Step 2 The problem is Go to step 3.
Page 133: Paper Feed Problems
Troubleshooting Paper feed problems Envelope seals when printing Action Contact The problem is Use envelopes that have been stored in a dry environment. customer solved. Note: Printing on envelopes with high moisture content can seal the support. ﬂaps. Resend the print job. Does the envelope seal when printing? Collated printing does not work Action...
Page 134 Troubleshooting Paper curl Action Step 1 Go to step 2. The problem is solved. Move the paper guides in the tray to the correct position for the paper loaded. Is the paper still curled? Step 2 Go to step 3. The problem is solved.
Page 135 Troubleshooting Action Step 2 The problem is Contact customer solved. support. From the home screen, touch Settings > Paper > Tray Conﬁguration > Paper Size/Type. Set the paper size and type to match the paper loaded in the linked trays. Print the document.
Page 136: Printing Problems
Troubleshooting Printing problems Conﬁdential and other held documents do not print Action Step 1 The problem is Go to step 2. solved. From the control panel, check if the documents appear in the Held Jobs list. Note: If the documents are not listed, then print the documents using the Print and Hold options.
Page 137 Troubleshooting Action Step 5 The problem is Contact customer solved. support. Add printer memory. Resend the print job. Are the documents printed? Slow printing Action Step 1 Go to step 2. The problem is solved. Make sure that the printer is not in Eco‑Mode. Resend the print job.
Page 138 Resend the print job. Is the document printed? Step 5 The problem is Contact customer solved. support. Remove, and then reinstall the printer software. Note: The printer software is available at http://support.lexmark.com. Resend the print job. Is the document printed?
Page 139 Troubleshooting Print quality is poor Blank or white pages Action Step 1 Go to step 2. The problem is solved. Remove, and then reinstall the imaging unit or imaging kit. Warning—Potential Damage: Do not expose the imaging unit or imaging kit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
Page 140 Troubleshooting Action Step 1 Go to step 2. The problem is solved. From the Quality menu on the control panel, select Color Adjust. Resend the print job. Is the print still too dark? Step 2 Go to step 3. The problem is solved.
Page 141 Troubleshooting Ghost images Leading edge A B C D A B C D A B C D A B C D Trailing edge Action Step 1 Go to step 2. The problem is solved. Load the tray with the correct paper type and weight. Resend the print job.
Page 142 Troubleshooting Action Step 1 Go to step 2. The problem is solved. Depending on your operating system, decrease the toner darkness from the Printing Preferences or Print dialog. Note: You can also change the settings on the printer control panel. Resend the print job.
Page 143 Troubleshooting Action Step 2 Go to step 3. The problem is solved. Depending on your operating system, specify the paper type and weight from the Printing Preferences or from Print dialog. Notes: • Make sure that the settings match the paper loaded in the tray.
Page 144 Troubleshooting Note: If horizontal dark lines keep appearing on your prints, then see the “Repeating defects” topic. Action Step 1 Go to step 2. The problem is solved. Depending on your operating system, specify the paper type and weight from the Printing Preferences or Print dialog. Notes: •...
Page 145 Troubleshooting Action Step 1 The problem is Go to step 2. solved. Move the paper guides in the tray to the correct position for the paper loaded. Resend the print job. Are the margins correct? Step 2 The problem is Contact customer solved.
Page 146 Troubleshooting Light print Action Step 1 Go to step 2. The problem is solved. From the Quality menu on the control panel, select Color Adjust. Resend the print job. Is the print still too light? Step 2 Go to step 3. The problem is solved.
Page 147 Troubleshooting Action Step 5 Go to step 6. The problem is solved. Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you are ready to use it. Resend the print job. Is the print still too light? Step 6 Contact...
Page 148 Troubleshooting Print crooked or skewed Action Step 1 Go to step 2. The problem is solved. Move the paper guides in the tray to the correct position for the paper loaded. Resend the print job. Is the print still crooked or skewed? Step 2 Go to step 3.
Page 149 Troubleshooting Action Take note of the The problem is solved. Measure the distance between the defects. distance, and then • If the distance between the defects equals 35.4 mm contact customer (1.39 in.) or 125.7 mm (4.95 in.), then replace the support or your service photoconductor unit.
Page 150 Troubleshooting Text or images cut off Leading edge ABCDE ABCDE ABCDE Trailing edge Action Step 1 Go to step 2. The problem is solved. Move the paper guides in the tray to the correct position for the paper loaded. Resend the print job. Is the page or image still clipped? Step 2 Go to step 3.
Page 151 Troubleshooting Toner easily rubs off Leading edge Trailing edge Action Contact customer The problem is solved. Depending on your operating system, specify the support. paper type, texture, and weight from the Printing Preferences or Print dialog. Notes: • Make sure that the settings match the paper loaded in the tray.
Page 152 Troubleshooting Vertical dark lines or streaks Leading edge ABCDE ABCDE ABCDE Trailing edge Action Step 1 Go to step 2. The problem is solved. Depending on your operating system, specify the paper type, texture, and weight from the Printing Preferences or Print dialog.
Page 153 Troubleshooting Vertical white lines Leading edge Trailing edge Action Step 1 Go to step 2. The problem is solved. Depending on your operating system, specify the paper type and weight from the Printing Preferences or Print dialog. Notes: • Make sure that the settings match the paper loaded in the tray.
Page 154 Troubleshooting The printer is not responding Action Step 1 The problem is Go to step 2. solved. Connect the power cord to the electrical outlet. CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
Page 155: Color Quality Problems
Troubleshooting Action Step 8 The problem is Contact customer solved. support. Turn off the printer, wait for about 10 seconds, and then turn it back Is the printer responding? Job prints from the wrong tray or on the wrong paper Action Step 1 The problem is...
Page 156 Troubleshooting Modifying the colors in printed output From the home screen, touch Settings > Print > Quality > Advanced Imaging > Color Correction > Manual. From the Advanced Imaging menu, select Color Correction Content. Choose the appropriate color conversion setting. Object type Color conversion tables RGB Image...
Page 157 Troubleshooting How does the printer know what color to print? When printing a document, information describing the type and color of each object is sent to the printer and is passed through color conversion tables. Color is translated into the appropriate amounts of cyan, magenta, yellow, and black toner used to produce the color you want.
Page 158: Faxing Problems
Troubleshooting Faxing problems Cannot send or receive faxes Action Step 1 The problem is Go to step 2. solved. Resolve any error messages that appear on the display. Can you send or receive a fax? Step 2 The problem is Go to step 3.
Page 159 Troubleshooting Action Step 5 The problem is Go to step 6. solved. Check if the printer is connected to an analog phone service or to the correct digital connector. • If you are using an Integrated Services for Digital Network (ISDN) telephone service, then connect to an analog telephone port of an ISDN terminal adapter.
Page 160 Troubleshooting Can receive but not send faxes Action Step 1 The problem is Go to step 2. solved. Load the original document properly into the ADF tray or on the scanner glass. Can you send faxes? Step 2 The problem is Contact customer solved.
Page 161: Scanning Problems
Troubleshooting Poor fax print quality Action Step 1 The problem is Go to step 2. solved. Enhance the print quality. From the home screen, touch Settings > Print > Quality. Adjust the settings. Is the fax print quality satisfactory? Step 2 The problem is Go to step 3.
Page 162 Troubleshooting Partial copies of document or photo Action Step 1 The problem is Go to step 2. solved. Make sure that the document or photo is loaded facedown on the upper left corner of the scanner glass. Copy the document or photo. Is the document or photo copied correctly? Step 2 The problem is...
Page 163 Troubleshooting Action Step 2 The problem is Go to step 3. solved. Check the ﬁle you want to scan. Make sure that the ﬁle name is not already used in the destination folder. Make sure that the document or photo you want to scan is not open in another application.
Page 164: Contacting Customer Support
The serial number is also listed on the menu settings page. Lexmark has various ways to help you solve your printing problem. Visit the Lexmark Web site at http://support.lexmark.com, and then select one of the following:...
Page 165: Upgrading And Migrating
– Application cards • Forms and Bar Code • PRESCRIBE • IPDS • Lexmark Internal Solutions Port (ISP) – MarkNet N8360 (802.11 b/g/n/a wireless print server bundled with LEX‑M06‑001 Mobile Solutions Module) – IEEE 1284‑B Parallel Card – RS‑232C Serial Card Installing a memory card CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller...
Page 166 Upgrading and migrating Unpack the memory card. Warning—Potential Damage: Avoid touching the connection points along the edge of the card. Insert the memory card until it clicks into place. Reattach the access cover. Connect the power cord to the electrical outlet, and then turn on the printer. CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
Page 167 Upgrading and migrating Unpack the internal solutions port (ISP) kit. Mounting bracket Thumbscrews If necessary, remove the printer hard disk.
Page 168 Upgrading and migrating Insert the bracket into the board until it clicks into place. Attach the ISP to the bracket.
Page 169 Upgrading and migrating If necessary, attach the hard disk to the ISP. Remove the hard disk bracket. Connect the hard disk to the ISP. Warning—Potential Damage: Do not touch or press the center of the hard disk.
Page 170 Upgrading and migrating Reattach the access cover. Connect the power cord to the electrical outlet, and then turn on the printer. CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
Page 171 Upgrading and migrating Push the card ﬁrmly into place. Note: The entire length of the connector on the card must touch and be ﬂush against the controller board. Warning—Potential Damage: Improper installation of the card may cause damage to the card and the controller board.
Page 172 Upgrading and migrating Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board components or connectors. Unpack the hard disk. Attach the hard disk to the controller board. Warning—Potential Damage: Do not touch or press the center of the hard disk.
Page 173 Upgrading and migrating If an internal solutions port (ISP) is installed, then do the following: Remove the hard disk bracket. Attach the hard disk to the ISP.
Page 174 CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a caster base, furniture, or other feature to prevent instability causing possible injury. For more information on supported conﬁgurations, see www.lexmark.com/multifunctionprinters. Turn off the printer. Unplug the power cord from the electrical outlet, and then from the printer.
Page 175 Upgrading and migrating Note: If optional trays are already installed, then unlock them from the printer before lifting the printer. Do not try to lift the printer and trays at the same time. Align the printer with the optional tray, and then lower the printer until it clicks into place. Connect the power cord to the printer, and then to the electrical outlet.
Page 176 Upgrading and migrating • Printer • Staple ﬁnisher Installing the keyboard tray Turn off the printer. Open door A. Remove the keyboard attach cover. Unpack the keyboard tray.
Page 177 Upgrading and migrating Attach the keyboard to the base. Insert the keyboard tray. Close door A. Turn on the printer.
Page 178 Upgrading and migrating Installing the staple ﬁnisher Turn off the printer. Open door C. Remove the paper bail.
Page 179 Upgrading and migrating Remove the paper transport and staple ﬁnisher connector covers. Unpack the staple ﬁnisher. Insert the staple ﬁnisher until it clicks into place.
Page 180 CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a caster base, furniture, or other feature to prevent instability causing possible injury. For more information on supported conﬁgurations, see www.lexmark.com/multifunctionprinters. From the control panel, press and hold the power button for 5 seconds to turn off the printer.
Page 181 Upgrading and migrating Open the covers at the side of the caster base. Open door C.
Page 182 Upgrading and migrating Remove the paper bail. Remove the covers. Unpack the paper transport, and then remove the pieces of tape.
Page 183 Upgrading and migrating Lift, and then align the paper transport to the printer. Firmly push the paper transport until it clicks into place. Close door C. CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, keep hands clear of the labeled area when closing door C.
Page 184 Upgrading and migrating Unpack the multiposition staple, hole punch ﬁnisher, and then remove the pieces of tape. On a ﬂat, sturdy, and stable surface, align the ﬁnisher to the printer. Note: Avoid installing the ﬁnisher on a carpeted surface.
Page 185 Upgrading and migrating Push the ﬁnisher to the printer by applying pressure at the bottom of the ﬁnisher until it clicks into place. Check if the ﬁnisher and printer are properly locked by pulling hard the ﬁnisher away from the printer. If the ﬁnisher detaches from the printer, then repeat step 13 through...
Page 186 Upgrading and migrating When the ﬁnisher is locked, do the following: Open the bottom front door of the ﬁnisher. Turn the levers of the ﬁnisher counterclockwise until the levers are loose. Close the door. Check the gap between the printer and the ﬁnisher.
Page 187: Software
Upgrading and migrating If the gap is uneven, then do either of the following: To ﬁx the gap at the top, rotate the side wheels of the ﬁnisher clockwise. To ﬁx the gap at the bottom, rotate the side wheels of the ﬁnisher counterclockwise. Connect the power cords to the ﬁnisher and the printer, and then connect them to a properly grounded electrical outlet.
Page 188: Firmware
Updating ﬁrmware Some applications require a minimum device ﬁrmware level to operate correctly. For more information on updating the device ﬁrmware, contact your Lexmark representative. From the Embedded Web Server, click Settings > Device > Update Firmware. Browse to locate the required ﬂash ﬁle.
Page 189: Notices
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Page 190 All licensing notices associated with this product can be viewed from the root directory of the installation software CD. Trademarks Lexmark and the Lexmark logo are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.
Page 191 58 (mono); 59 (color) Ready 16 (CX825); 14 (CX860) Values are subject to change. See www.lexmark.com for current values. Static sensitivity notice This symbol identiﬁes static-sensitive parts. Do not touch the areas near these symbols without ﬁrst touching a metal surface in an area away from the symbol.
Page 192 Notices Laser notice The printer is certiﬁed in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for Class I (1) laser products, and elsewhere is certiﬁed as a Class I laser product conforming to the requirements of IEC 60825-1.
Page 193: Index
Index Index collating copies copying multiple pages on one copying 30 sheet 30 adapter plug 42 Color Correction copying on letterhead 29 adding hardware options copying photos 29 manual 156 print driver 187 Color Correction Content 156 creating shortcuts adding internal options color quality, troubleshooting e‑mail 32 print driver 187...
Page 194 Index environmental settings ﬂash drive imaging unit hibernate mode 100 printing from 25 replacing 70 sleep mode 100 scanning 49 imaging units erasing printer hard disk font sample list ordering 61 memory 51 printing 28 importing a conﬁguration ﬁle exporting a conﬁguration ﬁle forms using the Embedded Web using the Embedded Web...
Page 195 Index memory card 165 personal identiﬁcation number ordering method 54 keyboard tray developer unit 61 phone splitter 39 installing 176 imaging units 61 photoconductor unit photoconductor unit 60 ordering 60 toner cartridges 59 replacing 67 letterhead ordering supplies photos copying on 29 staple cartridges 61 copying 29 line ﬁlter 38...
Page 196 135 RJ11 adapter 42 print jobs do not print 138 slow printing 137 recycling tray linking does not work 134 Lexmark packaging 101 safety information 7, 8 unable to read ﬂash drive 130 Lexmark products 101 saving paper 30 printer...
Page 197 Index separator bracket photoconductor unit 60 conﬁdential and other held replacing 79 staple cartridges 61 documents do not print 136 serial interface card toner cartridges 59 envelope seals when troubleshooting 132 waste toner bottle 61 printing 133 serial printing supply notiﬁcations incorrect margins on prints 144 setting up 55 conﬁguring 61...
Page 198 24 updating ﬁrmware ﬂash ﬁle 188 USB port enabling 130 using genuine Lexmark parts 59 genuine Lexmark supplies 59 using the ADF copying 29 using the control panel 15 using the home screen 16 using the scanner glass...

This manual is also suitable for:

Cx825 series Cx825de Cx825dte Cx825dtpe Cx825dtfe Cx860de ... Show all

Lexmark CX860 Series User Manual

Quick Links

Related Manuals for Lexmark CX860 Series

Summary of Contents for Lexmark CX860 Series

This manual is also suitable for:

Table of Contents