Staple Finisher Controller Board Removal - Lexmark CX825 Service Manual

Staple finisher controller board removal
1
Remove the right cover. See
2
Remove the rear cover. See
3
Disconnect the cables, and then remove the four screws (A).
Staple finisher staple cartridge door removal
1
Remove the right cover. See
2
Remove the rear cover. See
3
Release the arm from the pin, and then remove the door.
"Staple finisher right cover removal" on page
"Staple finisher rear cover removal" on page
A
"Staple finisher right cover removal" on page
"Staple finisher rear cover removal" on page
Repair information
790
787.
788.
787.
788.
7564