Staple Finisher Tamper Pulley Gear Removal - Lexmark CX825 Service Manual

Installation notes:
a
Move the tampers (A) to the right.
b
Align the edges of the spring with the markings on the plate.
c
Insert the belt into the belt holder (B).
B
Staple finisher tamper pulley gear removal
1
Remove the right cover. See
2
Remove the rear cover. See
3
Remove the inner rear cover. See
4
Remove the front cover. See
5
Remove the tamper assembly. See
"Staple finisher right cover removal" on page
"Staple finisher rear cover removal" on page
"Staple finisher inner rear cover removal" on page
"Staple finisher front cover removal" on page
"Staple finisher tamper assembly removal" on page
Repair information
828
787.
788.
795.
787.
822.
7564