Printhead Alignment Adjustment - Lexmark CX825 Service Manual

3
Turn the skew adjustment screw (B) clockwise for negative skew or counterclockwise for positive skew.
4
After the skew has been corrected, tighten the two screws, and then reinstall the ADF front cover.

Printhead alignment adjustment

Printhead misalignment may cause crooked or skewed print. Perform this procedure after replacing the
printhead or if there are skewed print issues.
Checking the test page for alignment
1
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Registration adjust > Quick test
2
Check the test page.
The following test page result shows a properly aligned printhead:
B
A
Repair information
596
7564