Color Alignment Adjustment - Lexmark CX825 Service Manual

2
If necessary, perform printhead alignment until the test page arrows are squarely aligned. See
alignment adjustment" on page
Note: After printhead alignment, make sure that the printhead clamp hex screw is properly locked.
3
Generate a new test page for margin alignment, check the arrows, and if necessary, adjust the following
settings:
•
Top margin
•
Bottom margin
•
Left margin
•
Right margin
Note: Correcting the printhead and margin settings is necessary before proceeding with the Color
alignment procedure.
4
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Color alignment adjust
On the AA adjustment row, touch Start. The Color alignment procedure is performed on the cyan, magenta,
and yellow colors.
Note: The procedure may not work for old firmware versions. Make sure that the latest firmware version
is installed.
5
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Color alignment adjust > Cyan > Quick test
Check the alignment markings on the test page generated. Follow the instructions on the test page to correct
the color misalignment.
6
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Color alignment adjust > Yellow > Quick test
Check the alignment markings on the test page generated. Follow the instructions on the test page to correct
the color misalignment.
7
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Color alignment adjust > Magenta > Quick test
Check the alignment markings on the test page generated. Follow the instructions on the test page to correct
the color misalignment.
8
If color misalignment still occurs, then repeat steps 4 to 7.

Color alignment adjustment

Color misalignment may cause blurred print or color misalignment. Perform this procedure to align the colors.
1
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Color alignment adjust
2
Select the color to align, and then touch Quick test. Follow the alignment procedure on the test page.
Note: Repeat this step until the color misalignment in the test page is corrected.
596.
Repair information
602
7564
"Printhead