Option Board Information
The Board In/Out/Op1/Op2 sub menus allows you to
check whether option boards are installed.
Knob
Parameter Description
F1
Displays
information about
the board(s) in
input expansion
slots.
F2
Displays
information about
the board(s) in
output expansion
slots.
F3
Displays
information about
the board(s) in
the DME1 and
DME2 sockets.
F4
Displays
information about
the board(s) in
the MV1 and MV2
sockets.
Software Version Information
The Firmware sub menu allows you to check software
version information.
The software name and version information appear in the
display areas of the F1 to F4 knobs.
Alarms
The Alarm sub menu allows you to check the various
alarms.
Knob
Parameter Description
F1
PWR
Displays
information about
the installed
power supply
unit(s) in the
processor unit.
Knob
F2
Settings
F3
s: 4SDI Input
Board
a: SD analog
input board
F4
d: DVI input
board
-: Not installed
s: 4SDI Output
Board
a: SD analog
output board
d: DVI output
board
-: Not installed
dme: 2CH DME
Board
-: Not installed
mv: Multi Viewer
Board
-: Not installed
Settings
Single A: Only
one standard
power supply
unit is
installed.
Single B: Only
one optional
power supply
unit is
installed.
Dual: Both a
standard and
an optional
power supply
unit are
installed.
Parameter Description
PS
Displays the
alarm status of
the power supply
unit(s) in the
processor unit.
FN
Displays the
alarm status of
the fan.
CP
Displays
information about
the installed
power supply
unit(s) in the
control panel.
Settings
ok: Operation is
normal.
ng: An error has
been detected.
ok: Operation is
normal.
ng: An error has
been detected.
ok: Operation is
normal.
ng: An error has
been detected.
171
Status Information