Connecting A Telephone Line - Oki MPS4200mb Basic User Manual

Connecting a Telephone Line

Depending on your environment, a method to
connect a telephone line is different. Based on
the following figures, connect the line for your
environment.
Note
Turn off the machine when you connect the telephone line
with the machine.
You can not connect to the ISDN line directly. To connect to
it, use the terminal adopter (TA) and connect to the LINE
connection of the machine.
Don't connect with USB cable or LAN cable at this point.
Memo
Depending on your environment of the machine, Checking
the reception mode, refer to
P. 45.
Checking the dial type settings, refer to
dialing type" P. 43.
Connecting to the Public Line
(Connecting for Fax Only)
Plug one end of the [Telephone cable]
1
into the [LINE connection] of your
machine and the other end into a
[Public Line (Analog)].
LINE connection
Telephone cable
Note
Connect telephone cable to [LINE connection] without
fail. Never connect it to [TEL connection].
Basic Settings for Faxing (for MB471, MB491, ES4191 MFP only)
"Specifying Reception Mode"
"Settings for each
Public Line
(Analog)
Connecting to the Public Line
(Connecting for Fax and Telephone)
Plug one end of the [Telephone cable]
1
into the [LINE connection] of your
machine and the other end into a
[Public Line (Analog)].
LINE connection
Remove the [Telephone connector cover].
2
Plug the external telephone's cable into
3
the [TEL connection] of your machine.
The telephone that is connected to the machine
is called external telephone.
Note
The number of telephone that is able to be connected to
the machine is only one.
Don't connect the telephone to the machine in parallel. If you
connect the telephone to the machine in parallel, the following
problem will occur and the machine will not work correctly.
- 41 -
Public Line
(Analog)
Telephone cable
Telephone connector
cover
TEL connection
1