2.4.13 Position of the Multifeeder Latch Solenoid (SL6)
Slide the solenoid in the direction of A so that the gap between the shutter [1] and the
shutter plate [2] is 0.4 ±0.2 mm when the solenoid is drawn.
COPYRIGHT© 2001 CANON INC.
A
F06-204-16
[1]
F06-204-17
2000 2000 2000 2000
CANON iR105 REV.0 JULY 2001
CHAPTER 6 TROUBLESHOOTING
[2]
6-31