Sorter; Adjust - Canon iR105 Service Manual

4 SORTER

4.1 ADJUST

PNCH-HLE
Use it to adjust the punch hole position (paper feed direction) when the
puncher unit is used.
Memo
Range of
adjustment
-23 to 23 (unit: about 0.5 mm)
<Using the Mode>
1) Make a print of the Test Chart, and check the position of the holes.
2) Select the item, and change the setting to adjust.
3) Press the OK key.
4) Make a print of the Test Chart once again, and check to see if the posi-
COPYRIGHT© 2001 CANON INC.
A higher value moves the punch hole toward the leading edge of pa-
per (middle of paper).
tion of the holes is as indicated.
Feed
direction
2000 2000 2000 2000
Paper
Higher value
F00-401-01
CANON iR105 REV.0 JULY 2001
SERVICE MODE
SORTER>ADJUST
Lower value
S-127