Canon iR105 Service Manual page 78

CHAPTER 2 NEW FUNCTIONS
4) Disconnect the connector [1] (1 pc.
each), and detach the original size 1/2
[2].
b. Removing the Original Size Sensor 3/4
1) Remove the copyboard glass. (See
2.9.1.a.)
2) Move the No. 1 mirror base to the left
edge.
3) Remove the screw, and disconnect the
connector [2]; then, detach the original
size sensor unit (rear) [3].
2-30
COPYRIGHT© 2001 CANON INC.
[2]
F02-209-35
[1]
[2]
F02-209-36
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[2]
[1]
[3]