Canon iR105 Service Manual page 329

CHAPTER 5 MAINTENANCE AND INSPECTION
4) While forcing the lint-free paper against
the photosensitive drum, wipe the drum
as if to rub it from the front to the rear
and then from the rear to the font with
force.
• Clean the drum in widths of 5
to 10 cm in peripheral direc-
tion.
• For a single width, you may
force the lint-free paper back
and forth 15 to 20 times with-
out damaging the drum.
5) Wait until the alcohol has evaporated;
then, dry wipe the drum with lint-free
paper. If traces remain, repeat step 4)
and increase the number of trips made.
6) Rorate the drum so that that new areas
may be cleaned (5 to 10 cm). Repeat
steps 3) to 5) until the entire surface of
the drum has been cleaned.
7) Remove the cleaning blade assembly.
5-20
COPYRIGHT© 2001 CANON INC.
F05-402-06
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001