Canon iR105 Service Manual page 662

DATE-DSP
Use it to change the mode of notation for the 208V model.
Memo
Setting 0: YYYY MM/DD (default)
1: DD/MM YYYY
2: MM/DD/YYYY
MB-CCV
Use it to impose restrictions on the Box function (not used for the copier in
question; by Control Card IV).
Setting 0: for remote, enable operation and printing regardless of presence/ab-
sence of card and do not charge
1: for remote, enable operation regardless of presence/absence of card.
A print job may be sent, but printing will not occur in the absence of
a card; if a card is used, printing is enabled but is changed. (default)
2: for remote, disable operation. No print job may be sent.
PR-D-SEL
Use it to set the density for printing (PDL input).
0 (light) ⇔
Setting
CONTROL
Use it to enable/disable the PDL count function. (not used in the copier in
question)
Setting 0: do not count PDL output
1: count PDL output if control card is connected
B4-L-CNT
Use it to specify whether soft counter 1 through 6 should couunt B4 as
large-size or small-size.
Setting 0: small-size (default)
1: large-size
TRY-STP
Use it to prohibit suspension of printing in relation to the number of sheets
in a stack to staple or a stack of different size sheets in the finisher.
Setting 0: normal mode (suspend printing for number of sheets/mix of differ-
ent size sheets; default)
1: suspend printing if height sensor is ON (full of paper)
COPYRIGHT© 2001 CANON INC.
For the 208V model, the default is '1'.
⇔ ⇔ 4 (standard (default) ⇔ ⇔ ⇔
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
COPIER>OPTION>USER
⇔ ⇔ 8 (dark) ⇔ ⇔
SERVICE MODE
S-101