Canon iR105 Service Manual page 715

Hide thumbs Also See for iR105:

Table of Contents

The saddle tray motor (M49) is faulty. The saddle tray home position sensor

(PI41) is faulty. The saddle stitcher controller PCB is faulty.

0001 The saddle tray home position sensor does not go ON when the

0002 The saddle tray home position sensor does not go OFF when the

The guide home position sensor (PI54) is faulty. The paper pushing plate

home position sensor (PI55) is faulty. The paper pushing plate leading edge

position sensor (PI56) is faulty. The saddle stitcher controller PCB is faulty.

0001 The connector of the guide home position sensor is disconnected.

0002 The connector for the paper pushing plate home position sensor is

0003 The connector of the paper pushing plate lading edge sensor is dis-

The inlet cover open/closed sensor (PI51) is faulty. The outlet cover open

sensor (PI46) is faulty. The saddle stitcher controller PCB is faulty.

0001 The inlet cover is found to be open for 1 sec or more from the start

0002 The exit cover is found to be open for 1 sec or more from the start

saddle motor is driven for 8 sec or more.

saddle tray motor is driven for 1 sec or more.

disconnected.

of initial rotation of the connected device with the inlet cover, front

cover, and delivery cover closed.

of printing or from the start of initial rotation of the connected de-

vice with the inlet cover, front cover, and delivery cover closed.

2000 2000 2000 2000

CANON iR105 REV.0 JULY 2001

Chapters

Table of Contents