Canon iR105 Service Manual page 642

<Input Keys and Display>
Key
counter check
0 to 9
Stop
ID
User Mode
<PART-CHK>
Use it to check the operation of each load.
CL
Use it to select the clutch to check.
<Using the Mode>
1) Select the item.
2) Using the keypad, enter the code (T00-204-02) of the clutch in ques-
3) Press the OK key.
CL-ON
Use it to check the operation of a clutch.
<Using the Mode>
1) Select the item, and press the OK key.
•
MTR
Use it to select the motor to check.
<Using the Mode>
1) Select the item.
2) Enter the code (T00-204-03) of the motor using the keypad.
3) Press the OK key.
MTR-ON
Use it to check the operation of a motor.
<Using the Mode>
1) Select the item, and press the OK key.
•
•
•
•
COPYRIGHT© 2001 CANON INC.
Display
BILL
0 to 9
STOP
ID
USER
tion.
ON → 10 sec OFF → ON → 10 sec OFF → ON → OFF
20 sec ON → OFF
for hopper and duplex horizontal registration motor, 10 sec ON → OFF
for shift tray motor, stops at front/rear HP
for vibration motor (M10/M20), ON/OFF operation repeats at intervals
of about 5 sec
2000 2000 2000 2000
COPIER>FUNCTION>PART-CHK
Key
Start
Reset
Power Save
Clear
Guide
T00-204-01
CANON iR105 REV.0 JULY 2001
SERVICE MODE
Display
START
RESET
STAND BY
CLEAR
?
S-81