Canon iR105 Service Manual page 204

CHAPTER 2 NEW FUNCTIONS
3) Remove the 2 screws [1], and detach the
laser driver cooling fan [2].
When mounting the fan, be sure
that the direction of air current
is as indicated by the arrow.
f. Removing the Curl-Reducing Fan (FM6)
1) Remove the fixing/feeding unit cover.
(See 8.4.1.d.)
2) Disconnect the 4 connectors [1], and
remove other 4 screws [2]; then, detach
the fixing motor base [3].
3) Remove the 2 screws [1], and discon-
nect the 2 connectors [2]; then, detach
the delivery speed switching clutch [3].
When removing the delivery
speed switching clutch, take
care not to lose the bearings and
the washers (rear only) on both
ends of the clutch shaft.
2-156
COPYRIGHT© 2001 CANON INC.
[1] [2]
F02-804-36
[1]
[2]
[2]
F02-804-37
[2]
[1]
[1]
[3]
F02-804-38
2000 2000 2000 2000
[1]
[3] [1]
[2]
CANON iR105 REV.0 JULY 2001