Canon iR105 Service Manual page 640

<FIXING>
Use it to execute fixing assembly-related auto adjustment.
NIP-CHK
Use it to generate output for measuring the fixing nip width.
<Using the Item>
1) Make about 20 A4 prints using the test sheet.
2) Place A4 paper in the tray.
3) Select the item to highlight, and press the OK key.
•
4) Measure the width of the area shaded in the figure.
COPYRIGHT© 2001 CANON INC.
The paper will be picked up and is stopped between the fixing rollers
once, and then will be delivered in about 20 sec.
Standards:
|a-c|=0.5mm or less
a and b are measurements at 10 mm from either edge of paper.
2000 2000 2000 2000
COPIER>FUNCTION>FIXING
c
Feed
direction
a
F00-204-04
CANON iR105 REV.0 JULY 2001
SERVICE MODE
Standards:
200V: 9.0mm ±0.5mm
208/230V: 10.0mm ±0.5mm
b
Middle
of paper
S-79