Canon iR105 Service Manual page 656

SHARP
Use it to change the sharpness level of images.
• A higher value makes images sharper.
Setting 1 to 5 (default: 3)
FDW-DLV
Use it to switch between face-up and face-down delivery mode, thereby en-
suring good stacking when making multiple prints.
Setting 0: normal (face-up for all when using 1 original)
1: when using 1 original, face-up if for one set; face-down if for mul-
tiple sets (default)
COTDPC-D
Use it to set toner save mode.
Setting 0: do not use toner save mode (default)
1: VDT-20V of coy image, VDT-P25V of print image (target of -10%,
approx.)
2: VDT-40V of copy image, VDT-P-50V of print image (target of -20%,
approx.)
3: VDT-60V of copy image, VDT-P-75V of print image (target of -30%,
approx.)
RMT-LANG
not used
TR-SP-C1
Use it to set the transfer/separation output setting when the right deck is se-
lected, thereby preventing faults otherwise occurring.
Setting 0: setting for plain paper (default)
1: setting for recycled paper
2: setting for tracing paper
TR-SP-C2
Use it to set the transfer/separation output setting when the left deck is
used, thereby preventing faults otherwise occurring.
Setting 0: setting for plain paper (default)
1: setting for recycled paper
2: setting for tracing paper
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
SERVICE MODE
COPIER>OPTION>BODY
S-95