Pcbs - Canon iR105 Service Manual

CHAPTER 2 NEW FUNCTIONS

2.9.3 PCBs

a. Removing the Light Adjustment PCB
1) Remove the copyboard glass.
2) Remove the screw [1] from the No. 1
mirror base assembly; then, while push-
ing down the claws [2], detach the light
adjustment PCB holder.
3) Disconnect the connector J165 [1], and
remove the screw [2]; then, detach the
light adjustment PCB [3].
2-24
COPYRIGHT© 2001 CANON INC.
[1]
F02-209-24
F02-209-25
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[2]
[1]
[2]
[3]