Canon iR105 Service Manual page 274

No.
3 While pressing the front and the rear of
the transfer/separation charging assembly
[1], pull it about 1 cm to the front; then,
detach it to the rear upper left.
Using alcohol, clean the transfer/
separation charging wire.
4 While observing the following, mount the
transfer/separation charging assembly:
• The solvent must be fully dry.
• The gut wire is not brought into contact
with the transfer guide [1] to avoid a cut.
• The ground plate [2] is found outside
the charging assembly [3] frame as
shown.
5 Connect the connector of the transfer/
separation charging assembly, and fit the
fixing.
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[1]
F04-205-03
[1]
F04-205-04
[2]
[3]
F04-205-05
4-15