Canon iR105 Service Manual page 634

<INSTALL>
Use it to operate the machine as part of installation work.
TONER-S
Use it to supply toner from the hopper to the developing assembly and to
stir the toner inside the developing assembly.
<Using the Mode>
1) Select the item, and press the OK key.
2) See that the machine performs toner supply. (about 8 to 10 min)
•
3) See the machine automatically stops at the end of toner supply.
CARD
Use it to set a number for the card reader.
Input 1 to 200
Default: 0 (not connected)
As many as 1000 cards can be used starting with the one given the pre-set
number.
EX:
• If the input is '1', cards from 1 to 1000 can be used.
• If the input is 2001, cards from 2001 to 3000 can be used.
COPYRIGHT© 2001 CANON INC.
• Before pressing the OK key, check to make sure that the developing
assembly is securely mounted.
• Before pressing the OK key, check to make sure that the control
panel monitor indicates the message 'Copier Ready'.
• Never turn off the power while the machine is operating.
While the machine supplies toner, it indicates a countdown of the sup-
ply time (in sec, starting at 600 sec).
2000 2000 2000 2000
COPIER>FUNCTION>INSTALL
CANON iR105 REV.0 JULY 2001
SERVICE MODE
S-73