Duplex Unit - Canon iR105 Service Manual

CHAPTER 2 NEW FUNCTIONS
b. Removing the Registration Brake Clutch
1) Remove the transfer separation charging
assembly front cover. (1 screw)
2) Disconnect the connector [1], and
loosen the 2 screws [2] (w/ hex hole);
then, detach the registration brake
clutch [3].

6.6.5 Duplex Unit

a. Removing the Reversal Motor
1) Remove the duplex feed fan unit. (See
8.4.3.r.)
2) Loosen the screw [1]; then, while pull-
ing the tension support plate [2] in the
direction of the arrow, tighten the screw
[1] (to loosen the tension of the belt
[2]).
3) Disconnect the connector [4], and re-
move the 2 screws [5]; then, detach the
reversal motor [6].
2-100
[2]
COPYRIGHT© 2001 CANON INC.
[2]
F02-606-28
[1]
[5]
F02-606-29
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[2]
[3]
[1]
[3] [6]
[5]
[4]