Canon iR105 Service Manual page 73

b. Removing the Inverter PCB
1) Remove the rear cover. (See 8.4.1.e.)
2) Remove the rear upper cover (2 screws)
3) Remove the inverter cooling fan duct.
(See 8.4.3.h.)
4) Remove the 2 screws [1], and discon-
nect the 7 connectors [2].
5) Free the left and right hooks [2] (1 pc.
each) on the mounting plate of the in-
verter unit [1], and detach them upward.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 2 NEW FUNCTIONS
[1]
[2]
[2]
A
F02-209-26
[1]
[2]
View from A
F02-209-27
[2]
[2] [1]
2-25