The Output Has A Displaced Leading Edge (Considerably Large Margin); The Output Has A Displaced Leading Edge (Large Margin); The Output Has A Displaced Leading Edge (No Margin) - Canon iR105 Service Manual

CHAPTER 6 TROUBLESHOOTING

3.3.15 The output has a displaced leading edge (considerably large margin)

3.3.16 The output has a displaced leading edge (large margin)

3.3.17 The output has a displaced leading edge (no margin)

Original placement
1) Is the original placed correctly?
NO:
----------
2) Make copies using the following sources of paper; do they show dif-
YES: Check the source of paper with displacement of the following:
Registration clutch, Registration roller
3) Make adjustments in the following service mode:
NO:
YES: End.
6-82
Place the original correctly.
ferent results of displacement?
[1] left/right front deck
[2] cassette
[3] side paper deck
[4] duplex feeding assembly
[1] life of the rollers
[2] paper lint on the rollers
[3] dirt in the power path
COPIER>ADJUST>FEED-ADJ>REGIST. Is the problem cor-
rected?
[1] Check the registration roller for deformation and wear.
[2] Check the registration roller drive system.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001