Canon iR105 Service Manual page 660

VBR-M-SW
Use it to set vibration motor mode.
Setting 0 to 4
0: ON only if water content is 9 g/kg (after multiple rotation) and dur-
1: OFF regardless of water content (stop interval of stop sequence set
2: ON for after multiple rotation and during STOP sequence regard-
3: ON after multiple rotation and during STOP sequence only if water
4: ON after multiple rotation and during STOP sequence and for
<USER>
Use it to make user-related machine settings.
COPY-LIM
Use it to change the upper limit imposed on the number of copies to make.
Setting 1 to 999 copies (default: 999)
SLEEP
Use it to turn ON/OFF sleep mode.
Setting 0: OFF
1: ON (default)
WEB-DISP
Use it to turn ON/OFF the fixing web length message.
Memo
Setting 0: OFF (do not issue; default)
1: ON (issue)
SIZE-DET
Use it to turn ON/OFF the original size detection mechanism.
Setting 0: OFF (default)
1: ON
COPYRIGHT© 2001 CANON INC.
ing pre-transfer/separation charging assembly wire cleaning.
at 1.5 sec)
less of water content
content is les than 9 g/kg
transfer/separation charging assembly wire cleaning (default)
During initial multiple rotation (at first power-on), the mode is turned
ON 5 times; for others, it is tuned ON once.
0: OFF (do not issued; but issued only when in service mode)
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
SERVICE MODE
COPIER>OPTION>USER
S-99