Table of Contents
Advertisement
<BODY>
Use it to select copier-related settings.
PO-CNT
Use it to turn on and off the potential control mechanism.
Setting
0: OFF
1: ON (default)
TRNSG-SW
Use it to select toner guide bias control mode.
Setting
0: 200 V for absolute water content of 22 g or more; 600 V for others
1: fixed to 600 V
2: fixed to 200 V
3: 200 V for absolute water content of 18 g or more; 600 V for others
(default)
4: 200 V for absolute water content of 14 g or more; 600 V for others
MODEL-SZ
Use it to switch default reproduction ratio display and ADF original size
detection.
Setting
0: AB (6R5E)
1: INCH (5R4E)
2: A (3R3E)
3: AB/INCH (6R5E)
FIX-TEMP
Use it to set the down sequence start temperature for thick paper mode.
Setting
0: 194°C
1: 189°C (default)
2: 184°C
IDL-MODE
Use it to select idle rotation mode for the developing assembly.
Memo
Setting
0: OFF (no idle rotation)
1: auto control based on readings of environment sensor (default)
2: start idle rotation when fixing roller temperature reaches 100°C
3: start idle rotation when main power switch goes ON
COPYRIGHT© 2001 CANON INC.
Set it to '2' or '3' if the image becomes distorted or too light.
2000 2000 2000 2000
CANON iR105 REV.0 JULY 2001
SERVICE MODE
COPIER>OPTION>BODY
S-91
Advertisement
Chapters
Table of Contents
Troubleshooting
