Fixing Assembly, Delivery Assembly - Canon iR105 Service Manual

CHAPTER 6 TROUBLESHOOTING

5.1.3 Fixing Assembly, Delivery Assembly

Separation claw (delivery assembly)
1) Is the separation claw worn/deformed?
YES: 1.
Fixing assembly,
Upper/lower roller
2) Is the upper/lower roller deformed or damaged?
YES: Replace the roller.
Paper guide
3) Is the paper guide soiled with toner?
YES: Clean it with solvent.
4) Is the height of the paper guide correctly?
NO:
Nip
5) Is the lower roller pressure (nip) as indicated?
NO:
Delivery assembly,
Web
6) Is the web taken up correctly?
NO:
Sensor lever
7) Does each sensor lever move smoothly?
NO:
Delivery sensor
8) Are the external delivery sensor (PS10) and the claw jam sensor
NO:
Delivery reflecting plate
9) Is the delivery reflecting plate oriented in the direction of delivery?
NO:
Leading edge margin,
Delivery roller drive assembly
10) Does the delivery roller move smoothly?
NO:
YES: Check the leading edges of copies for a margin. (3.0 mm or more)
6-146
Replace the separation claw.
2. If soiled, clean it with solvent.
Correct the height.
Correct it.
Check the fixing cleaner assembly.
Adjust the lever so that it moves smoothly.
(PS6) normal?
Replace the sensor.
Correct the orientation of the delivery reflecting plate.
Check the delivery roller drive assembly.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001