Adjusting The Image Position Of Copier Output (Adf Mode) - Canon iR105 Service Manual

2.1.3 Adjusting the Image Position of Copier Output (ADF mode)

Make these adjustments after you have adjusted the "image position of
printer output" and the "image position of copoier output (book mode)."
1) Adjusting the Image Leading Edge Non-Image Width
Place an A3 test chart and an A4 test chart on the ADF original tray, and make a copy to
check the image leading edge non-image width.
Standard: 4 +1.5 mm, -1.0 mm
Adjustment: FEEDER>ADJUST>STRD-S (A4 original)
FEEDER>ADJUST>STRD-L (A3 original)
• A higher value increases the margin.
• A lower value decreases the margin.
2) Adjusting the Image Front Non-Image Width
Place an A3 size test chart in the ADF original tray, and make a copy to check the image
front non-image width.
Standard: 2.5 ±1.5 mm
Adjustment: Adjust the ADF original tray fixing position.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 6 TROUBLESHOOTING
4+1.5mm,-1.0mm
F06-201-15
2.5 ±1.5mm
F06-201-16
6-17