Ending Service Mode; Backing Up Service Mode Settings - Canon iR105 Service Manual

Hide thumbs Also See for iR105:

Table of Contents

1.3 Ending Service Mode

• Press the Reset key once to return to the Service Mode Initial screen (F00-102-01).

• Press the Reset key twice to leave service mode and return to the User screen (Standard

If you used service mode (ADJUST, FUNCTION, OPTION), be sure to

turn off and then on the main power switch after leaving service mode.

At time of shipment from the factory, each machine is adjusted, and the adjustment values

are recorded in the Service Sheet (found in the service book case behind the front cover).

If you have replaced the reader controller PCB or the DC controller PCB, or if you have

executed RAM clear for each, the ADJUST and OPTION adjustment values will be initial-

ized to their default settings. If you have made adjustments in the field, be sure to print out a

service sheet (COPIER>FUNCTION>MISC-P>LBL-PRINT>OK), and store it away. If the

sheet does not show a specific item, use its blank space.

You can also use service mode (COPIER>FUNCTION>MISC-P>P-PRINT>OK) to print

out all service mode settings (i.e., under COPIER>ADJUST/OPTION/COUNTER) at once.

2000 2000 2000 2000

CANON iR105 REV.0 JULY 2001

Service Sheet

SERVICE MODE

Table of Contents