Canon iR105 Service Manual page 284

No.
5 Put the original delivery tray [1] over the
lower arm, and hook the 2 claws [2] found
at the bottom for the original delivery tray
in the notches of the right upper cover;
check that there is no gap, and then secure
it in place with 2 RS tightening screws [3]
(M4x10).
6 Hook the claw [1] of the upper arm [2] on
the hole in the lower arm, and temporarily
fix the upper arm in place with 4 binding
screws [3] (M4x14).
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[3] [1]
F04-208-05
[3]
[2]
[3]
F04-208-06
[2]
[3]
[2]
[1]
4-25