Inputting Characters
You can input letters and characters to create messages by following the procedure
below.
Switching the character type
Press
([A/a] appears on the upper side). Pressing each time changes the
character type in the following order.
Uppercase letters → symbols → lowercase letters → numbers
Deleting all input characters
Press
([CLR] appears on the upper side).
Moving the cursor to the left
Press
([←] appears on the upper side).
Moving the cursor to the right
Press
([→] appears on the upper side).
Deleting the most recently input character
Press
([×] appears on the upper side).
Completing input
Press
or
.
5