E. Relationship Of Toner Cartridge System Counters Display Messages, And Machine Operations - Sharp AR-BC260 Service Manual

Message No.
1 (Now is maintenance timing. Code: DK)
2 (Now is maintenance timing. Code: D∗)
4 Now is maintenance timing. Code: DK
*1: Monochrome print job YES, Color print job NO
First digit of code: D (Drum Kit)
Second digit of code: Color (K= Black, C= Cyan, M= Magenta, Y= Yellow) When two or more occur, the priority order is K, C, M, and Y.
• The count-up timing and the count number are synchronous between the drum cartridge print counter and the maintenance counter.
• The drum cartridge accumulated mileage is the product of the drum drive speed (117, 78, or 58.5mm/s) and the drum drive time by mea-
suring for every second.
• Execute SIM 24-7 (Drum counter clear) to clear the drum cartridge counter and the drum cartridge of the said color, and the message is
cleared.
• If there is any job being executed when the drum cartridge life end is detected, the paper feed in the machine is discharged and the
machine is stopped. → Same as stop by paper empty.
E. Relationship of toner cartridge system counters, display messages, and machine operations
Sensor name
Toner cartridge accumulated mileage (K)
Toner cartridge accumulated mileage (C)
Toner cartridge accumulated mileage (M)
Toner cartridge accumulated mileage (Y)
Toner remaining quantity sensor (K)
Toner remaining quantity sensor (C)
Toner remaining quantity sensor (M)
Toner remaining quantity sensor (Y)
Counter name
Toner cartridge accumulated mileage (K)
Toner cartridge accumulated mileage (C)
Toner cartridge accumulated mileage (M)
Toner cartridge accumulated mileage (Y)
Toner cartridge pixel count (K)
Toner cartridge pixel count (C)
Toner cartridge pixel count (M)
Toner cartridge pixel count (Y)
Message No.
1 ( toner quantity is near end) . . Necessary ones of K,C,M,Y are displayed.
2 Replace the toner cartridge.
3 (Replace the toner cartridge.
• The toner cartridge accumulated mileage and the threshold values of the near end value and the end value of the toner cartridge pixel
counter are written in the CRUM, and control is performed according to them.
• Toner cartridge accumulated mileage is the product of the drum drive speed (117, 78, or 58.5mm/s) and the drum drive time measures for
every second.
• If there is any job being executed when the toner cartridge life end is detected, the paper feed in the machine is discharged and the
machine is stopped. → Same as stop by paper empty.
Message
Near end value
SIM 26-69 "0"
12,339,507 [mm] Message 1
6,494,477 [mm] Message 1
6,494,477 [mm] Message 1
6,494,477 [mm] Message 1
Message 1
5-time continuous
Message 1
detection of sensor light
interruption time as lower
Message 1
than the specified level
Message 1
End value
SIM 26-69 "0"
12,988,960 [mm] Message 1
7,143,920 [mm] Message 1
7,143,920 [mm] Message 1
7,143,920 [mm] Message 1
6,732,001,280 [count] after
Message 2
detection of near end
6,732,001,280 [count] after
Message 3
detection of near end
6,732,001,280 [count] after
Message 3
detection of near end
6,732,001,280 [count] after
Message 3
detection of near end
Message
) . . Necessary ones of C,M,Y are displayed.
AR-BC260 MAINTENANCE LIST 10 - 12
Message when near end is detected
When SIM 26-38 is
set to Print Allow.
SIM 26-69 "1" SIM 26-69 "0"
Message 1
Message 1
Message 1
Message 1
Message 2 Message 1
Message 3 Message 1
Message 3 Message 1
Message 3 Message 1
Message when end is over
When SIM 26-38 is
set to Print Allow.
SIM 26-69 "1" SIM 26-69 "0"
Message 2
Message 3
Message 3
Message 3
Message 2
Message 3
Message 3
Message 3
Monochrome YES/Color NO
Print job YES/NO
YES
YES
NO
When SIM 26-38 is
set to Print Inhibit.
SIM 26-69 "1"
Message 2
Message 3
Message 3
Message 3
When SIM 26-38 is
set to Print Inhibit.
SIM 26-69 "1"
Print job YES/NO
YES
NO