Sharp AR-BC260 Service Manual page 191

46 -40
Purpose Adjustment
Function Collective adjustment of FAX mode (all modes)
(Purpose) document scan density (when FAX is installed)
Section ICU PWB/FAX
Item Picture quality
Operation/ The print densities of all the modes (FAX modes)
Procedure can be collectively and uniformly changed with the
adjusted density level of each mode (normal, fine
text, super fine, ultra fine) as the start point.
1. Select the print density adjustment mode with the scroll key.
2. Enter the adjustment value with the 10-key, and press [OK]
key.
The adjustment value is set.
3. Set the print condition with the scroll key and the 10-key.
4. Set a document and press [EXECUTE] key.
The document is scanned at the density level set in procedure 2
and it is printed.
(Item to be set)
Item
A AUTO Exposure data value
(Collective)
B PAPER Print execution cassette
selection
C EXIT TRAY Paper exit tray selection
*1
: 1: MFT 2: CS1 3: CS2 4: CS3 5: CS4 6: LCC
*2 : 1: R 2: S
46 -41
Purpose Adjustment
Function Used to adjust the FAX mode (normal mode)
(Purpose) document scan density (when the FAX is installed).
Section ICU PWB/FAX
Item Picture quality
Operation/ 1. Select the print density adjustment mode with the
Procedure scroll key.
2. Enter the adjustment value with the 10-key, and press [OK] key.
The adjustment value is set.
3. Set the print condition with the scroll key and the 10-key.
4. Set a document and press [EXECUTE] key.
The document is scanned at the density level set in procedure 2
and it is printed.
(Item to be set)
Item
A AUTO Automatic
B LEVEL1 Manual level 1
C LEVEL2 Manual level 2
D LEVEL3 Manual level 3
E LEVEL4 Manual level 4
F LEVEL5 Manual level 5
G EXECUTE MODE Print mode
H PAPER Print execution
cassette selection
I EXIT TRAY Paper exit tray
selection
*1
: 1: AUTO 2: LEVEL1 3: LEVEL2 4: LEVEL3 5: LEVEL4
6: LEVEL5
*2
: 1: MFT 2: CS1 3: CS2 4: CS3 5: CS4 6: LCC
*3 : 1: R 2: S
46
Purpose
Function
(Purpose)
Section
Item
Operation/
Set range Default
Procedure
1 to 99 50
2. Enter the adjustment value with the 10-key, and press [OK] key.
The adjustment value is set.
*1
1 to 6 2
3. Set the print condition with the scroll key and the 10-key.
4. Set a document and press [EXECUTE] key.
1 to 2 *2 2
The document is scanned at the density level set in procedure 2
and it is printed.
(Item to be set)
A AUTO
B LEVEL1
C LEVEL2
D LEVEL3
E LEVEL4
F LEVEL5
G AUTO
H LEVEL1
I
J LEVEL3
K LEVEL4
L LEVEL5
Set range Default
1 to 99 50
M EXECUTE
1 to 99 50
1 to 99 50
N PAPER
1 to 99 50
1 to 99 50 O EXIT TRAY
1 to 99 50
*1
: 1: AUTO 2: LEVEL1 3: LEVEL2 4: LEVEL3
*1 5: LEVEL4 6: LEVEL5 7: AUTO (HALF TONE)
1 to 6 1
8: LEVEL1 (HALF TONE) 9: LEVEL2 (HALF TONE)
1 to 6 *2 2
10: LEVEL3 (HALF TONE) 11: LEVEL4 (HALF TONE)
12: LEVEL5 (HALF TONE)
*3
1 to 2 1
*2
: 1: MFT 2: CS1 3: CS2 4: CS3 5: CS4 6: LCC
*3
: 1: R 2: S
AR-BC260 SIMULATION 9 - 53
-42
Adjustment
Used to adjust the FAX mode (fine text mode)
document scan density (when the FAX is installed).
ICU PWB/FAX
Picture quality
1. Select the print density adjustment mode with the
scroll key.
Item
Fine text/Auto/
Without half-tone
Fine text/ Manual level 1/
Without half-tone
Fine text/ Manual level 2/
Without half-tone
Fine text/ Manual level 3/
Without half-tone
Fine text/ Manual level 4/
Without half-tone
Fine text/ Manual level 5/
Without half-tone
Fine text/Auto/With half-
(HALF TONE) tone
Fine text/ Manual level 1/
(HALF TONE) With half-tone
LEVEL2 Fine text/ Manual level 2/
(HALF TONE) With half-tone
Fine text/ Manual level 3/
(HALF TONE) With half-tone
Fine text/ Manual level 4/
(HALF TONE) With half-tone
Fine text/ Manual level 5/
(HALF TONE) With half-tone
Print mode
MODE
Print execution cassette
selection
Paper exit tray selection
Set
Default
range
1 – 99 50
1 – 99 50
1 – 99 50
1 – 99 50
1 – 99 50
1 – 99 50
1 – 99 50
1 – 99 50
1 – 99 50
1 – 99 50
1 – 99 50
1 – 99 50
*1
1 – 12 1
*2
1 – 6 2
1 – 2 *3 1