Sharp AR-BC260 Service Manual page 51

l. Belt cleaning brush
1) Remove the transfer unit from the machine.
2) Remove the connector and the screw, and remove the belt
drive unit.
3) Remove the transfer belt.
4) Remove the Belt cleaning brush.
m. Transfer discharge sheets.
1) Remove the transfer unit from the machine.
2) Remove the connector and the screw, and remove the belt
drive unit.
3) Remove the transfer belt.
4) Remove the terminals.
5) Remove the transfer discharge sheets.
AR-BC260 DESCRIPTIONS OF EACH SECTION 7 - 14
n. Transfer lift-up unit
1) Remove the screw, and remove the left cabinet of the
machine.
2) Remove the connector.
3) Adjust the rail positions so that section A does not make con-
tact with the acuride section when the transfer lift-up unit is
lifted up.
A
4) Lift the transfer lift-up unit in the arrow direction B with section
A as the fulcrum, and remove it.
B
A
A
A