Sharp AR-BC260 Service Manual page 149

Code
Function (Purpose)
Main Sub
66 3 Used to check the memory on the
Modem controller. (When the FAX is
installed.)
4 Used to select a signal and send it to
the line and speaker (at the max.
level). (When the FAX is installed.)
5 Used to select a signal and send it to
the line and the speaker. (Level: Soft
SW setting) (When the FAX is
installed.)
6 Used to print the check list of the
contents when confidential
registration is made. (When the FAX
is installed.)
7 Used to print all the images in the
memory. (When the FAX is installed.)
8 Used to select a voice message and
send it to the line and the speaker (at
the max. level). (When the FAX is
installed.)
9 Used to select a signal and send it to
the line and the speaker. (Level: soft
SW setting). (When the FAX is
installed.)
10 All the images in the memory can be
deleted. (When the FAX is installed.)
11 Used to select a pattern and send it
to the line and the speaker at 300bps
(at the max. level). (When the FAX is
installed.)
12 Used to select a pattern and send it
to the line and the speaker at
300bps. (Level: soft SW setting)
(When the FAX is installed.)
13 Used to register a dial number for
test used in SIM 66-14/15/16. (When
the FAX is installed.)
14 Used to adjust and check the make
time of dial pulse (10pps). (When the
FAX is installed.)
15 Used to adjust and check the make
time of the dial pulse (20pps). (When
the FAX is installed.)
16 Used to adjust and check the send
level of DTFM signal. (When the FAX
is installed.)
17 Used to select the DTFM signal (1 –
9, 0, *, #) to send it to the line and
the speaker (at the max. level).
(When the FAX is installed.)
18 Used to select the DTFM signal (1 –
9, 0, *, #) to send it to the line and
the speaker (Level: soft SW setting).
(When the FAX is installed.)
19 Used to write the ICU PWB SRAM
contents (various set values and user
data) into the Flash ROM (AR-MM9).
(When the FAX is installed.)
20 Used to write the Flash ROM (AR-
MM9) contents (SRAM contents
written with SIM 66-19) into the ICU
PWB SRAM. (When the FAX is
installed.)
21 Used to print various registration
information, communication, file
management, system error, and
protocol information. (When the FAX
is installed.)
22 Used to set the sound volume of the
handset. (When the FAX is installed.)
23 Used to download the FAX program.
(When the FAX is installed.)
24 Used to clear the data in the FAST
memory. (When the FAX is installed.)
Purpose
Operation test/check FAX
Operation test/check FAX
Operation test/check FAX
Data output/check FAX
Data output/check FAX
Operation test/check FAX
Operation test/check FAX
Data clear FAX
Operation test/check FAX
Operation test/check FAX
Setting FAX
Adjustment FAX
Adjustment FAX
Adjustment FAX
Operation test/check FAX
Operation test/check FAX
Backup FAX
Backup FAX
Check FAX
Setting FAX
Setting FAX
Data clear FAX
AR-BC260 SIMULATION 9 - 11
Section
Operation
Operation
Operation
Data
Data
Operation
Operation
Data
Operation
Operation
Data
Operation
Operation
Operation
Operation
Operation
Data
Data
Data
Operation
Operation
Data
Item
Confidential pass
code
Image data
Image data
Registration
Initializing