Sharp AR-BC260 Service Manual page 125

Digital full color multifunctional system
Hide thumbs Also See for AR-BC260:
Table of Contents

Advertisement

4) Cancel the simulation mode, and make a copy in the normal
mode to check the copy density in the white area and the low-
density area by using the test chart (UKOG-0283FCZZ).
In this simulation mode, press CLOSE key to jump to the normal
copy mode and make actual copies of the service chart and user
documents. In this manner, the adjustment result can be checked.
The adjustment can be performed also by switching between the
simulation mode and the normal copy mode alternately and check-
ing the adjustment result with actual copies.
ADJ 11E
Copy color balance density adjustment (each copy mode) (Normally unnecessary to adjust.)
This adjustment must be performed in the following cases:
∗ When a U2 trouble occurs.
∗ When the MFP PWB is replaced.
∗ When the EEPROM of the MFP PWB is replaced.
Used to adjust the gamma and the density in each copy mode individually. The adjustment in each copy mode is not required normally, but
is performed when the user requests it.
1) Enter either of SIM 46-10 to 46-16 modes.
(Select the simulation according to the copy mode to be
adjusted.)
Full color
AUTO
TEXT
NORMAL
COLOR TONE ENHANCEMENT
COPT TO COPY
MAP
NORMAL
COLOR TONE ENHANCEMENT
PRINTED
NORMAL
PHOTO
COLOR TONE ENHANCEMENT
COPT TO COPY
TEXT/PRINTED
NORMAL
PHOTO
COLOR TONE ENHANCEMENT
COPT TO COPY
PHOTOGRAPH NORMAL
COLOR TONE ENHANCEMENT
TEXT/PHOTO
NORMAL
COLOR TONE ENHANCEMENT
Single color
TEXT
NORMAL
(Affected by
COPT TO COPY
the adjustment
MAP
NORMAL
result of full
PRINTED
NORMAL
color mode)
PHOTO
COPT TO COPY
TEXT/PRINTED
NORMAL
PHOTO
COPT TO COPY
PHOTOGRAPH NORMAL
TEXT/PHOTO
NORMAL
Copy mode
Auto
Text
Map
Printed photo
Text/printed
photo
Photograph
Text/Photograph Normal
Text
Map
Printed photo
Text/printed
photo
Photograph
Text/Photograph Normal
AR-BC260 SETTING AND ADJUSTMENTS 8 - 32
Serviceman chart (Color patch section)
Check the copy density in the low-density area
and the white area of the color patch section.
Adjustment (Simulation)
Color balance/
density
adjustment of
adjustment of all
each copy mode
Main
Sub
Text/printed
46
12
photo
Normal
11
Color emphasis
Copy document
10
Normal
11
Color emphasis
Normal
12
Color emphasis
Copy document
10
Normal
12
Color emphasis
Copy document
10
Normal
13
Color emphasis
14
Color emphasis
Normal
25/(26)
Copy document
Normal
Normal
Copy document
Normal
Copy document
Normal
Collective color
Low-density
balance/density
area color
balance/density
copy modes
adjustment
Main
Sub
Main
Sub
46
21/20/
46
1
24

Advertisement

Table of Contents
loading

Table of Contents