Sharp AR-BC260 Service Manual page 206

66 -03
Purpose Operation test/check
Function Used to check the memory on the Modem controller.
(Purpose) (When the FAX is installed.)
Section FAX
Item Operation
Operation/ 1. Press the [EXECUTE] key.
Procedure
Read/write checks of the EEPROM, the SRAM (G/A), and the
SDRAM on the modem controller and the SRAM and the Flash
ROM on the MFP controller are executed and the results are
displayed.
66 -04
Purpose Operation test/check
Function Used to select a signal and send it to the line and
(Purpose) speaker (at the max. level).
(When the FAX is installed.)
Section FAX
Item Operation
Operation/ The page can be selected with the scroll keys.
Procedure 1. Select the send mode.
2. Press the [EXECUTE] key.
(Sendable signals)
Page.1: NO SIGNAL (No signal is sent.)
33.6 V34 (3429)
31.2 V34 (3429)
28.8 V34 (3429)
26.4 V34 (3200Low)
24.0 V34 (3200Hi)
21.6 V34 (3200Low)
19.2 V34 (3000Hi)
16.8 V34 (3000Low)
14.4 V34 (3000Hi)
12.0 V34 (2800)
9.6 V34 (2800)
7.2 V34 (2800)
4.8 V34 (2400)
2.4 V34 (2400)
14.4 V33
∗
The unit of setting is kbps. Setting is made by the key display
name. The item in ( ) is, however, excluded.
66
Purpose
Function
(Purpose)
Section
Item
Operation/
Procedure
(Sendable signals)
Page.1:
∗
The unit of setting is kbps. Setting is made by the key display
name. The item in ( ) is, however, excluded.
Page.2: 12.0 V33
14.4 V17
12.0 V17
9.6 V17
66
7.2 V17
Purpose
9.6 V29
7.2 V29
Function
4.8 V27t
(Purpose)
2.4 V27t
0.3 FLG
Section
CED 2100
Item
CNG 1100
0.3 V21 Operation/
ANSam Procedure
RINGER
No RBT
AR-BC260 SIMULATION 9 - 68
-05
Operation test/check
Used to select a signal and send it to the line and
the speaker. (Level: Soft SW setting)
(When the FAX is installed.)
FAX
Operation
The page can be selected with the scroll keys.
1. Select the send mode.
2. Press the [EXECUTE] key.
NO SIGNAL (No signal is sent.)
33.6 V34 (3429)
31.2 V34 (3429)
28.8 V34 (3429)
26.4 V34 (3200Low)
24.0 V34 (3200Hi)
21.6 V34 (3200Low)
19.2 V34 (3000Hi)
16.8 V34 (3000Low)
14.4 V34 (3000Hi)
12.0 V34 (2800)
9.6 V34 (2800)
7.2 V34 (2800)
4.8 V34 (2400)
2.4 V34 (2400)
14.4 V33
-06
Data output/check
Used to print the check list of the contents when
confidential registration is made.
(When the FAX is installed.)
FAX
Data
1. Press the [EXECUTE] key.
The confidential registration check list (Box No.,
BOX name, and print pass code) is printed. (If there
is no registration, print is not made.)
Page.2: 12.0 V33
14.4 V17
12.0 V17
9.6 V17
7.2 V17
9.6 V29
7.2 V29
4.8 V27t
2.4 V27t
0.3 FLG
CED 2100
CNG 1100
0.3 V21
ANSam
RINGER
No RBT
Confidential pass code