Sharp AR-BC260 Service Manual page 89

(6) Cabinet disassembly 6
1) Remove the screws, and remove the glass holder right (A).
2) Remove the screws, and remove the scanner right cabinet
(B).
3) Remove the screws, and remove the connection right cabinet
(C).
(7) Cabinet disassembly 7
1) Remove the rear cabinet.
2) Remove the manual paper feed unit.
3) Remove the front right cabinet.
4) Remove the screws, and slide and remove the rear right cabi-
net (A) upward.
5) Remove the screws, and slide and remove the right lower cab-
inet (B) upward.
B
A
B
C
A
AR-BC260 DESCRIPTIONS OF EACH SECTION 7 - 52
(8) Cabinet disassembly 8
1) Remove the rear cabinet.
2) Remove the screws, and remove the FD connection cabinet
(A) and the front cabinet upper (B). Remove the screws, and
slide and remove the rear left cabinet cover (C) and the rear
left cabinet (D) upward.
A
C
D
(9) Cabinet disassembly 9
1) Remove the screws, and remove the FD paper exit port cabi-
net (A) and the operation panel plate (B).
B
A
(10) Cabinet disassembly 10
1) Remove the screw, and remove the upper cabinet rear cover.
Remove the connector and the screw, and remove the upper
cabinet rear unit.
B