Sharp AR-BC260 Service Manual page 148

Code
Function (Purpose)
Main Sub
52 1 Used to adjust the duplex print mode
stacking capacity (Used to adjust the
stop position of the duplex unit paper
tray width alignment plate. The home
position of the width alignment plate
is changed by software.)
53 8 Used to adjust the document feeder
unit document scanning position.
60 1 Used to check the operation of ICU
PWB image DRAM read/write.
61 4 Used to adjust the scanner (writing)
unit (LED array unit) skew.
63 1 Used to check the result of shading
correction. (The shading correction
data are displayed.)
3 Used to adjust the CCD color
balance (gamma).
5 Used to set the CCD color balance
(gamma) default.
6 Used to check the color balance
(gamma) check patch.
7 Used to set the target color balance
(gamma) for auto color balance
adjustment. The standard color
balance (gamma) or an optional color
balance (gamma) is set as the
service target.
8 Used to set the service target of the
automatic color balance adjustment
(SIM 46-24) and the automatic color
balance adjustment target of the key
operator program to the same
balance as the factory target of the
automatic color balance adjustment
(SIM 46-24).
9 Used to adjust the CCD gamma
(CCD calibration) (copy document
mode).
10 Used to set the copy document mode
color balance (gamma) default.
11 Used to set the factory color balance
in the automatic color balance
adjustment (SIM 46-24).
64 1 Used to adjust the operations of the
printer section (self-print operation/
color). (The print pattern, paper feed
mode, print mode, print quantity, and
density can be changed optionally.)
2 Used to print the color patch image
(adjustment pattern). The above
color patch image (adjustment
pattern) is outputted according to the
currently adjusted color balance
(gamma). Use SIM 63-7 to read the
color patch image (adjustment
pattern), which can be used as the
service target of the automatic color
balance (gamma) adjustment.
3 Used to check the operations of the
printer section (self-print operation/
BW). (The print pattern, the paper
feed mode, the print mode, the print
quantity, and the density can be set
optionally.)
65 1 Used to adjust the touch panel (LCD
display section) detection position.
2 Used to check the result of the touch
panel (LCD display) detection
position adjustment. (The
coordinates are displayed.)
66 1 Used to change/set the soft SW
setting (FAX-related items). (When
the FAX is installed.)
2 Used to initialize the soft SW setting
(FAX-related items) according to the
destination. (When the FAX is
installed.)
Purpose
Adjustment Duplex
Adjustment Automatic document
feeder
Operation test/check ICU (Memory)
Adjustment Scanner (writing)
Adjustment/Setting/ Scanner (Exposure)
Operation data output,
check (display, print)
Adjustment Scanner (reading)
Setting Scanner (reading)
Adjustment/Operation Image process (ICU)
data output check
(display, print)
Setting Image process (ICU)
Setting Scanner (reading)
Setting Scanner (reading)
Setting Scanner (Image
scanning)
Setting Scanner (reading)
Operation test/check Printer
Adjustment/Setting/ Printer
Operation data output,
check (display, print)
Operation test/check Printer
Adjustment Operation (Display,
procedure)
Adjustment/Setting/ Operation (Display,
Operation data output, procedure)
check (display, print)
Setting FAX
Setting FAX
AR-BC260 SIMULATION 9 - 10
Section
Operation
Operation
Operation
Operation
Operation
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Operation
Operation
Operation
Data
Item
Color balance
Color balance
Color balance
Color balance
Color balance
Color balance
Color balance
Initializing