Sharp AR-BC260 Service Manual page 187

46 -12
Purpose Adjustment
Function Used to adjust the copy color balance (color) (text/
(Purpose) printed photo mode/Photograph mode) (gamma/
density adjustment for each color)
Section Image process (ICU)
Item Picture quality
Operation/ 1. Select the color to be adjusted with the color key
Procedure (K/C/M/Y).
2. Select the adjustment point with the scroll key.
3. Enter the adjustment value of the selected point with the 10-
key and press the [OK] key. (The entered value is set.)
When the [EXECUTE] key is pressed, the color balance
adjustment check pattern corresponding to the entered adjustment
value is printed.
(Items to be set)
Display
A POINT1
↓
↓
O POINT15
46 -13
Purpose Adjustment
Function Used to adjust the copy color balance (color)
(Purpose) (photograph mode) (gamma/density adjustment for
each color)
Section Image process (ICU)
Item Picture quality
Operation/ 1. Select the color to be adjusted with the color key
Procedure (K/C/M/Y).
2. Select the adjustment point with the scroll key.
3. Enter the adjustment value of the selected point with the 10-
key and press the [OK] key. (The entered value is set.)
When the [EXECUTE] key is pressed, the color balance
adjustment check pattern corresponding to the entered adjustment
value is printed.
(Items to be set)
Display
A POINT1
↓
↓
O POINT15
Color balance
Min. Max.
Default
Value Value
245 755 500
↓ ↓ ↓
245 755 500
Color balance
Min. Max.
Default
Value Value
245 755 500
↓ ↓ ↓
245 755 500
AR-BC260 SIMULATION 9 - 49
46 -14
Purpose Adjustment
Function Used to adjust the copy color balance (color) (text/
(Purpose) photograph mode) (gamma/density adjustment for
each color)
Section Image process (ICU)
Item Picture quality
Operation/ 1. Select the color to be adjusted with the color key
Procedure (K/C/M/Y).
2. Select the adjustment point with the scroll key.
3. Enter the adjustment value of the selected point with the 10-
key and press the [OK] key. (The entered value is set.)
When the [EXECUTE] key is pressed, the color balance
adjustment check pattern corresponding to the entered adjustment
value is printed.
(Items to be set)
Display
A POINT1
↓
↓
O POINT15
46 -15
Purpose Adjustment
Function Engine color balance manual correction
(Purpose)
Section Image process (ICU)
Item Picture quality
Operation/ 1. Select the adjustment point with the scroll key.
Procedure 2. Enter the adjustment value of the selected point
with the 10-key and press the [OK] key. (The
entered value is set.)
(Items to be set)
Display
A POINT1
↓
↓
O POINT15
Color balance
Min. Max.
Default
Value Value
245 755 500
↓ ↓ ↓
245 755 500
Density
Min. Max.
Default
Value Value
373 627 500
↓ ↓ ↓
373 627 500