Sharp AR-BC260 Service Manual page 63

2) Remove the screw and the dark box cover (A). Remove the
connector, the screw, and the CCD unit (B).
B
c. Lamp unit
1) Shift the lamp unit to the position shown below. Loosen the
screw and remove the wire.
2) Rotate the lamp unit and lift it, and remove the harness holder
and the harness. Remove the lamp unit.
A
AR-BC260 DESCRIPTIONS OF EACH SECTION 7 - 26
d. Xenon lamp
1) Remove the lamp unit.
2) Remove the harness and the screw, and remove the Xenon
lamp.
e. Scanner motor
1) Remove the upper cabinet rear unit.
2) Remove the connector and the spring.
3) Remove the screws, and remove the scanner motor unit.
4) Remove the screws, and remove the scanner motor.